Relaunch Promotion
Product Showcase
0.7-1.5″ DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Out of stock
SKU : OXD3151000K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 7 1/2″
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 0.7-1.5″
UNSPSC Code : 41111600
Weight each : 0.53kg
| Weight | 1 kg |
|---|
Related products
-
AIRFLOW, VELOCITY & TEMPERATURE TESTERRead moreEdison Airflow, Velocity & Temperature Tester
TVA150
This meter is for measuring airflow and temperature. It is ideally used to measure the air speed at ventilation outlets and to test temperatures in residential and commercial environments such as offices, storeroomâs, greenhouses and places where climate conditions can be analysed. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.
Meter capabilities:
⢠Measuring wind/airflow in: m/s, km/h, fpm, mph, kts.
⢠Beaufort scale.
⢠Temperature in both °C and °F.
Testing ranges: 0.4 ~ 20m/s, 80 ~ 4000fpm, -10 ~ 50°C (14 ~ 122°F).
⢠4 digit clear LCD display with optional back light.
⢠Data hold function.
⢠Auto power âOFFâ and low power indicator.
⢠Battery operated – DC1.5V 3x AAA (included). -
AUTO RANGE DIGITAL CLAMPMETER 1000A AC/DCAdd to cartEdison Auto Range 1000A AC/DC Digital Clamp Meters – DCM070
Edison⢠multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters.
DCM070
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power âOFFâ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle,
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606g -
DM664 DIGITAL MULTIMETERRead moreDigital Multimeter – DM664
DM664
Extra large digits, temperature probe and short lead capacitor adaptor. Features include continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.
Voltage max: 700V AC, 1000V DC.
Current max: 10A AC/DC.
Resistance max: 200MW.
Capacitance max: 2mF.
Frequency max: 20kHz.
Temp max: -20 to 1000°C.
Safety rating: Cat III 600V, Cat II 1000V.
Warranty: 1 year. -
ELECTRONIC TACHOMETERRead moreEdison Electronic Tachometer
TNC150
Precise red LED light source (laser beam) together with a reflective strip, non-contact measurements can be made safely up to 40cm (15 3/4″) from the target. For measuring in rpm and rps.Testing range: 100 to 30000rpm/1.7 to 500rps.
6 digit clear LCD display with optional back light. Data hold function. Auto power ‘OFF’ & low power indicator. Battery operated: DC1.5V 3x AAA (included).
Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.Pack includes: Digital Tachometer. 2x 30cm Reflective Strips. Wrist strap. Hard carry case. DC1.5V x3 AAA batteries (installed). Instruction manual.
Picture descriptions:
Actual size of LCD
Test for regular rotary speed
Laser beam accuracy
Complete with protective head cover