Relaunch Promotion
Product Showcase
50-150mm DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
SKU : OXD3151500K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 240
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 50-150
UNSPSC Code : 41111600
Weight each : 1.28kg
| Weight | 1 kg |
|---|
Related products
-
AIRFLOW, VELOCITY & TEMPERATURE TESTERRead moreEdison Airflow, Velocity & Temperature Tester
TVA150
This meter is for measuring airflow and temperature. It is ideally used to measure the air speed at ventilation outlets and to test temperatures in residential and commercial environments such as offices, storeroomâs, greenhouses and places where climate conditions can be analysed. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.
Meter capabilities:
⢠Measuring wind/airflow in: m/s, km/h, fpm, mph, kts.
⢠Beaufort scale.
⢠Temperature in both °C and °F.
Testing ranges: 0.4 ~ 20m/s, 80 ~ 4000fpm, -10 ~ 50°C (14 ~ 122°F).
⢠4 digit clear LCD display with optional back light.
⢠Data hold function.
⢠Auto power âOFFâ and low power indicator.
⢠Battery operated – DC1.5V 3x AAA (included). -
5-IN-1 MULTIMETER & ENVIRONMENTAL TESTERRead moreEdison Auto Range Digital Multimeters – MET060
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
MET060
The 5 in 1 digital multimeter is capable of testing the following: electrical testing.
Temperature: -20 to 1000°C.
Humidity: 30 to 90%.
Sound level: 35 to 100db.
Illumination: 4000 to 40000Lux.
AC/DC voltage: 600V.
AC/DC current: 10A.
Resistance: 40MW.
Capacitance: 200mF.
Frequency: 1Hz to 200KHz.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function.Auto power OFFâ and low power indicator.
Digital display count: 3999.
Pack includes: environment digital multimeter, test probes, clamp-on test leads, tempereture sensor probe, 9V battery (installed), instruction manual.
Dimensions (W x D x H): 165 x 65 x 230mm. -
AUTO RANGE DIGI. CLAMP METER TRUE RMS 1000A AC/DCRead moreEdison Auto Range 1000A AC/DC Digital Clamp Meters – DCM070 True RMS
Edison⢠multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters.
DCM070 True RMS
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A.
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power âOFFâ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle.
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606g. -
REPLACEMENT PROBE FOR EDI5162900KRead moreReplacement Probe
Replacement Probe for Edison DM383 Digital Multimeter (EDI-516-2900K)