Relaunch Promotion
Product Showcase
LOP5000 FOOD SAFE SYNTHETIC OIL 5LTR
FDA Compliant NSF H1 Registered
No Mineral Oil
Hydrophobic will not take in water
Synthetic water clear
Food Safe
Non-Toxic
Anti-corrosive
Safe for use at temperatures
from -60 to 260C
CO2 propellant.
This lubricant is completely clear odourless and food safe, it contains no mineral hydrocarbons and meets with FDA and is NSF H1 registered.
It is a hydrophobic oil and therefore does not take in water, providing a barrier between water condensation and metal surfaces. This versatile lubricant can be used on sliding and rolling element bearing surfaces, metal, wood and plastics. non-flammable.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
Out of stock
SKU : SOL7405970H
FDA Compliant NSF H1 Registered
No Mineral Oil
Hydrophobic will not take in water
Synthetic water clear
Food Safe
Non-Toxic
Anti-corrosive
Safe for use at temperatures
from -60 to 260C
CO2 propellant.
This lubricant is completely clear odourless and food safe, it contains no mineral hydrocarbons and meets with FDA and is NSF H1 registered.
It is a hydrophobic oil and therefore does not take in water, providing a barrier between water condensation and metal surfaces. This versatile lubricant can be used on sliding and rolling element bearing surfaces, metal, wood and plastics. non-flammable.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
Specification :
Brand : Solent Lubricants For Food
eCl@ss Code : 23060101
Pack Size : 5 litre
Supplier Part No. : FS LUBE FLOW
UNSPSC Code : 15121526
| Weight | 1 kg |
|---|
Related products
-
METAL MARKING INK 1LTR WHITERead moreInk Refill Cans for Industrial Paint Markers
Bulk refills for Kennedy Paint markers
-
TRANSLUCENT PALE AMBER HOT DIP (SINGLE BAR)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
POLY BOTTLE AIR TOOL LUBRICANT 500mlRead moreAir Lube Oil
Excellent air release quality, low foaming ability and resists clogging. Contains anti-rust and anti-wear additives. Extremely resistant to water absorption and can be mixed with all mineral oil-based lubricants without draining the system. Can be used on all air tools. ISO Grade VG22.
-
TRANSLUCENT RED HOT DIP (SINGLE BAR)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).