Relaunch Promotion
Product Showcase
HTA500 FOOD SAFE HIGH-TECH GREASE 500ml
FDA Compliant
NSF H1 Registered
Synthetic Translucent
Food Safe
PTFE grease
Non-Toxic
Sets to No. 2 rated grease
Anti-corrosive
Safe for use at temperatures
from -40 to 340C
Food safe synthetic PTFE grease is a fully synthetic translucent non melting grease that allows fluid to penetrate into machine parts before setting to a No.2 rated grease.
It protects and lubricates with a non-toxic anti corrosive shield for use on sliding and rolling element bearing surfaces, metal, wood and plastics.
Manufactured from non-toxic lubricant ingredients listed by the FDA and is NSF H1 registered. Totally salt or fresh water resistant to be used inside and out on a range of machinery in temperatures ranging from -40C to 340C.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
Out of stock
SKUĀ :Ā SOL7406220C
FDA Compliant
NSF H1 Registered
Synthetic Translucent
Food Safe
PTFE grease
Non-Toxic
Sets to No. 2 rated grease
Anti-corrosive
Safe for use at temperatures
from -40 to 340C
Food safe synthetic PTFE grease is a fully synthetic translucent non melting grease that allows fluid to penetrate into machine parts before setting to a No.2 rated grease.
It protects and lubricates with a non-toxic anti corrosive shield for use on sliding and rolling element bearing surfaces, metal, wood and plastics.
Manufactured from non-toxic lubricant ingredients listed by the FDA and is NSF H1 registered. Totally salt or fresh water resistant to be used inside and out on a range of machinery in temperatures ranging from -40C to 340C.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.
SpecificationĀ :
BrandĀ :Ā Solent Lubricants For Food
eCl@ss CodeĀ :Ā 23060101
Pack SizeĀ :Ā 500ml
UNSPSC CodeĀ :Ā 15121526
| Weight | 1 kg |
|---|
Related products
-
LINE MARKER 750ml BLUERead moreKennedy Line Markers
For use on car parks, factory/ warehouse floors, playgrounds, sports fields, tennis courts, leisure centres and road surfaces. For stencils, line or free hand marking. CFC free formula, contains no lead additives. Fully compatible with major brand applicators. Size: 750ml can.
Please note, colours are for guidance only. -
TRANSLUCENT RED HOT DIP (SINGLE BAR)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
BALL POINT PAINT MARKER 46ml YELLOWRead moreIndustrial Paint Markers
Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece – ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.
-
2.5LTR MELTING POTRead moreIndustrial Melting Pots
A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.