Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

V227FS SOLID BAR VERTICAL CLAMP

Indexa Vertical Industrial Toggle Clamp – Fixed Spindle & Solid Bar Type

Fixed Spindle & Solid Bar Type
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.
Clamping Capacity – the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Out of stock

SKU : IND4431520K

Indexa Vertical Industrial Toggle Clamp – Fixed Spindle & Solid Bar Type

Fixed Spindle & Solid Bar Type
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.
Clamping Capacity – the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Specification :
Base Type : Flanged
Brand : Indexa
eCl@ss Code : 21020501
Holding Capacity : 227kg
Movement of Bar : 100°
Movement of Handle : 60°
Product Number : V227-FS
Supplied With : Solid Bar Hex Head ( 5/16″) and Bolt Retainer*
Supplier Part No. : V227FS
UNSPSC Code : 27112132
Weight each : 340g

Weight 1 kg
SKU: IND4431520K Categories: , , ,

Related products

  • 5/8″x1/2″x13TPI T-SLOT MACHINE CLAMP SET

    Atlas T-Slot Steel Clamping Sets – Inch

    58 Pieces Inch Sets (Quantity of each component part given in brackets)
    Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

    Read more
  • SC1215032 150x32x22mm M12 STEP CLAMP

    Atlas Step Clamp

    Material: Medium Carbon Steel.
    Hardness: HRC 32 – 38.
    Surface Finish: Black Oxide.

    Read more
  • SC1210032 100x32x19mm M12 STEP CLAMP

    Atlas Step Clamp

    Material: Medium Carbon Steel.
    Hardness: HRC 32 – 38.
    Surface Finish: Black Oxide.

    Read more
  • SC1415032 150x32x22mm M14 STEP CLAMP

    Atlas Step Clamp

    Material: Medium Carbon Steel.
    Hardness: HRC 32 – 38.
    Surface Finish: Black Oxide.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping