Relaunch Promotion
Product Showcase
JIGSAW BLADES (EQV. TO BOSCH T318B) PKT-5
Jigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.
‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.
Out of stock
SKU : KEN2403190K
Jigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.
‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.
Specification :
Brand : Kennedy Industrial
Capacity (mm) Alum. : 3.0-10.0
Capacity (mm) Plastics : –
Capacity (mm) Steel : 3.0-6.0
eCl@ss Code : 21011603
Effective Length : 100
Equiv. : T318B
Features : Wavy Set Teeth
Overall Weight : 0.056
Side set teeth : –
Supplier Part No. : D&N 3.11.20/5
Tapered and ground : –
Tooth Pitch : 2.0
UNSPSC Code : 27112802
Wavy set tooth form : y
| Weight | 1 kg |
|---|
Related products
-
6 LED COMBI STRETCH LIGHTRead moreEdison 6 LED Combi Stretch Light
6 LED stretch torch that can be used as either a torch or a lantern. Push the housing together for a focused beam of light, or stretch the torch to illuminate a wider area. Comes complete with a cord wrist strap. Ultra bright energy-saving LEDs give a typical battery life of approximately 24 hours. Requires 4x AAA batteries (not included).
Overall length: 115mm. -
HALOGEN RECHARGEABLE 2.5MILLION CANDLE PWR LANTERNRead more2.5 Million Candle Power Rechargeable Lantern
ERS002
2.5 million candle power super bright quartz halogen spotlight/lantern. Weatherproof. Two position handle, to ensure comfortable and ergonomic access. Swivel stand/handle. 6V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor for portable charging.
Battery operation time (20 hours full charge): 20 minutes. -
ALUMINIUM PUSH BUTTON LIGHT REQUIRES (2xAA BATTS)Read moreEdison剢 Torches, Lanterns & Spotlights
Anodised aluminium handle and head, which is water resistant and shockproof. Heavy duty magnet – tested up to 2kg. Body can be twisted in any direction to illuminate areas normally inaccessible to conventional light. End handle push button on/off. Spare bulb supplied.
Batteries not included. -
2.4V 0.75A KRYPTON BULB 2-PCE SETRead moreBulbs
To suit Edison pocket mini torches and security flashlights