Relaunch Promotion
Product Showcase
3″ 2-JAW DOUBLE ENDED MECHANICAL PULLER
Kennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.
Out of stock
SKU : KEN5033030K
Kennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 21043090
Overall Depth : 30
Overall Length : 127
Overall Weight : 0.439
Overall Width : 117
Product Number : MP275
Reach : 60
Spread : 40 – 75
Thread Length : 125
UNSPSC Code : 27111712
| Weight | 1 kg |
|---|
Related products
-
PETROL ENGINE COMPRESSION TESTERRead moreKennedy Compression Tester
Suitable for all types of spark plugs. Finds faults in piston rings, valves, head gaskets and cylinder bores. Suitable for use on most petrol engine vehicles and motorcycles. Can be used on crankshaft seals in two-stroke engines. 195mm flexible hose. For use on 14mm and 18mm threads. Large easy to read scale 0-21bar/0-300psi. Air release valve to allow rapid re-testing.
-
BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTORRead moreKennedy Ball Joint Servicing Kit
Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle
Contents:
1 x C-frame press and Forcing Screw.
3 x Receiver tubes: 2-3/4″ x 3″ / 2-1/4″ x 2-1/2″ / 1-3/4″ x 2″
Installation/Removal Adaptor & Cups
4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep). -
WINDSCREEN WIPER ARM REMOVAL TOOLRead moreKennedy Windscreen Wiper Arm Removal Tool
Windscreen wiper arm removal tool for removing stuck and stubborn taper fitting wiper arms.
Maximum opening: 27mm.
Collar size: 15mm. -
UNIVERSAL BALL JOINT REMOVERRead moreKennedy Ball Joint Separators
Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.
100mm Overall Length – Restricted Access
Designed for use in hard to reach and confined areas. Mainly for use on Asian import cars.