Relaunch Promotion
Product Showcase
2- TONNE 345mm MAXIMUM HEIGHT BOTTLE JACK
Kennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
Out of stock
SKU : KEN5035820K
Kennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 36120207
Height Min./Max. : 181 – 345 mm
Max Load : 2 Tonne
Max Load (Tonne) : 2 | ton
Max Saddle Adjustment : 48mm
Model Number : B234
Overall Depth : 260
Overall Length : 160
Overall Weight : 3
Overall Width : 110
Supplier Part No. : T90204S
UNSPSC Code : 24101612
Weight each : 3.00kg
| Weight | 1 kg |
|---|
Related products
-
PETROL ENGINE COMPRESSION TESTERRead moreKennedy Compression Tester
Suitable for all types of spark plugs. Finds faults in piston rings, valves, head gaskets and cylinder bores. Suitable for use on most petrol engine vehicles and motorcycles. Can be used on crankshaft seals in two-stroke engines. 195mm flexible hose. For use on 14mm and 18mm threads. Large easy to read scale 0-21bar/0-300psi. Air release valve to allow rapid re-testing.
-
DIESEL INJECTION PUMP PULLER FOR BMW/LR/VAUXH/OPELRead moreKennedy Diesel Injection Pump Puller
For the removal of diesel injection pumps from the following engines: DPP010, DPP020, DPP030.
-
BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTORRead moreKennedy Ball Joint Servicing Kit
Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle
Contents:
1 x C-frame press and Forcing Screw.
3 x Receiver tubes: 2-3/4″ x 3″ / 2-1/4″ x 2-1/2″ / 1-3/4″ x 2″
Installation/Removal Adaptor & Cups
4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep). -
DIESEL INJECTION PUMP PULLER FOR BMW M47/M57Read moreKennedy Diesel Injection Pump Puller
For the removal of diesel injection pumps from the following engines: DPP010, DPP020, DPP030.