Showing 1–16 of 18 results

• 

  100x4x16mm A30TBF DPC GRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  100x6x16mm A30TBF DPC GRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  115x4x22.23mm AS30RBF DPC GRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  115x6x22.23mm A30TBF DPCGRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  125x6x22.23mm A30TBF DPCGRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  180x6x22.23mm A30TBF DPCGRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  230x6x22.23mm A30TBF DPCGRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  230x6x22.23mm AS30INOX-BF DPC GRINDING DISC

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs

  Type 27 Depressed Centre Grinding
  For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.
  Optimum angle for use 25 to 35°.
  Grade A30/AS30 – For general-purpose use on metals.
  INOX – For use on stainless steel (iron, chlorine and sulphur free).

  Depressed Centre & Flat Reinforced Cutting & Grinding Discs
  All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
  Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

  Read more
• 

  4.1/2×1/4×7/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  4.1/2×3/16×7/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  4×1/4×5/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  4×3/16×5/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  5×1/4×7/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  7×1/4×7/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  7×1/4×7/8″ R30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more
• 

  7×3/16×7/8″ A30RBF DPC GRINDING DISC

  Depressed Centre Cutting & Grinding Discs

  Grade A30 – For general-purpose use on metals.
  Grade C24 – For use on stone and non-ferrous materials.
  Grade R30 – For use on stainless steel.
  Grade X24 – Special, for use on cast iron.

  Type 27 Depressed Centre Grinding
  Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ‘free hand’ or wet grinding.

  Optimum angle for use 25 to 35°.

  Read more