Relaunch Promotion
Product Showcase
Category: Engineers File-Bastard Cut
Engineers File-Bastard Cut
Showing 1–16 of 48 results
-
10″ (250mm) FLAT BASTARD ENGINEERS FILERp69.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) HALF ROUND BASTARD ENGINEERS FILERp107.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) HAND BASTARD ENGINEERS FILERp69.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) ROUND BASTARD ENGINEERS FILERp59.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) SQUARE BASTARD ENGINEERS FILERp68.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) THREE SQUARE BASTARD ENGINEERS FILERp84.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″ (250mm) WARDING BASTARD ENGINEERS FILERead moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) FLAT BASTARD ENGINEERS FILERp103.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HALF ROUND BASTARD ENGINEERS FILERp192.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HAND BASTARD ENGINEERS FILERp121.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) ROUND BASTARD ENGINEERS FILERp95.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) SQUARE BASTARD ENGINEERS FILERp114.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) THREE SQUARE BASTARD ENGINEERS FILERp126.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
14″ (350mm) FLAT BASTARD ENGINEERS FILERp147.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
14″ (350mm) HALF ROUND BASTARD ENGINEERS FILERp219.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
14″ (350mm) HAND BASTARD ENGINEERS FILERp147.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard