Relaunch Promotion
Product Showcase
Category: Engineers Files- Second Cut
Engineers Files- Second Cut
Showing 1–16 of 53 results
-
10″ (250mm) FLAT SECOND ENGINEERS FILERp72.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) HALF ROUND SECOND ENGINEERS FILERp112.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) HAND SECOND ENGINEERS FILERp72.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) MILLSAW 1 R/E HEAVY BLUNT SECOND FILERp120.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Mill Saw
Mill Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Mill Saw – Available with one or two round edges. Parallel edges, both edges cut for filing and sharpening saws. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) PILLAR SECOND ENGINEERS FILERead moreEngineerâs Hand Files
Pillar
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Pillar – Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. These files are designed for millwrights and mechanics for use in enlarging key-ways, slots, etc., close to the shoulder.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) ROUND SECOND ENGINEERS FILERp65.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) SQUARE SECOND ENGINEERS FILERp71.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
10″ (250mm) THREE SQUARE SECOND ENGINEERS FILERp87.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″ (250mm) WARDING SECOND ENGINEERS FILERead moreKennedy Industrial Quality Engineerâs Hand Files – Warding
Warding
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Warding – Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) FLAT SECOND ENGINEERS FILERp105.000Add to cartKennedy Industrial Quality Engineerâs Hand Files – Flat
Flat
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Flat – Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HALF ROUND SECOND ENGINEERS FILERp163.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Half Round
Half-Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Half-Round – Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) HAND SECOND ENGINEERS FILERp105.000Read moreEngineerâs Hand Files
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) MILLSAW 1 R/E SECOND FILERp147.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Mill Saw
Mill Saw
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Mill Saw – Available with one or two round edges. Parallel edges, both edges cut for filing and sharpening saws. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) ROUND SECOND ENGINEERS FILERp100.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Round
Round
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Round – Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) SQUARE SECOND ENGINEERS FILERp118.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Square
Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Square – Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard -
12″ (300mm) THREE SQUARE SECOND ENGINEERS FILERp137.000Read moreKennedy Industrial Quality Engineerâs Hand Files – Three Square
Three Square
Available in a comprehensive range of shapes and sizes.
Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.Three Square – Equilateral section (60° angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard