Relaunch Promotion
Product Showcase
Category: Flap Discs
Flap Discs
Showing 1–16 of 68 results
-
100x16mm ALUM/BACK AL/OXFLAP DISC P120Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm ALUM/BACK AL/OXFLAP DISC P36Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm ALUM/BACK AL/OXFLAP DISC P40Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm ALUM/BACK AL/OXFLAP DISC P60Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm ALUM/BACK AL/OXFLAP DISC P80Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm ALUM/BACK ZIRC FLAP DISC P120Read moreHigh Performance Flap Discs
Zirconium Grade Aluminium-Backed (For stainless steel).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s nd approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Zirconium Grade Aluminium-Backed (For stainless steel).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm) -
100x16mm ALUM/BACK ZIRC FLAP DISC P36Read moreHigh Performance Flap Discs
Zirconium Grade Aluminium-Backed (For stainless steel).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s nd approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Zirconium Grade Aluminium-Backed (For stainless steel).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm) -
100x16mm ALUM/BACK ZIRC FLAP DISC P40Read moreHigh Performance Flap Discs
Zirconium Grade Aluminium-Backed (For stainless steel).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s nd approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Zirconium Grade Aluminium-Backed (For stainless steel).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm) -
100x16mm ALUM/BACK ZIRC FLAP DISC P60Read moreHigh Performance Flap Discs
Zirconium Grade Aluminium-Backed (For stainless steel).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s nd approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Zirconium Grade Aluminium-Backed (For stainless steel).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm) -
100x16mm ALUM/BACK ZIRC FLAP DISC P80Read moreHigh Performance Flap Discs
Zirconium Grade Aluminium-Backed (For stainless steel).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s nd approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Zirconium Grade Aluminium-Backed (For stainless steel).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm) -
100x16mm F/GLASS AL/OX FLAP DISC P120Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS AL/OX FLAP DISC P36Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS AL/OX FLAP DISC P40Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS AL/OX FLAP DISC P60Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS AL/OX FLAP DISC P80Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS ZIRC FLAP DISC P120Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm)