Relaunch Promotion
Product Showcase
Category: Pullers - Mechanical
Pullers - Mechanical
Showing 1–16 of 28 results
-
105mm BEARING SEPARATORRead moreKennedy Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes.
Jaw hardness: 42° – 45° HRC. -
1300 KG RATCHET CABLE PULLER/LIFTERRead moreRatchet Cable Puller – 1300kg
Robustly constructed from galvanised steel with a powder coated body, hardened steel hooks with spring catches. It has a heavy duty swivel on the anchoring hook, 3.6m of 5mm aircraft cable giving a 1.5m pull and a sprung ratchet pawl. Suitable for pulling: trees, roots, fencing wires, vehicles, machines, boats, trailers, caravans etc.
-
150mm BEARING SEPARATORRead moreKennedy Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes.
Jaw hardness: 42° – 45° HRC. -
3″ 2-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
3″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
3″ 3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
4″ 2-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
4″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERAdd to cartKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
4″ 3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
50mm BEARING SEPARATORRead moreKennedy Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes.
Jaw hardness: 42° – 45° HRC. -
6″ 2-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
6″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions. -
6″ 3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 3-Jaw
3-Jaw Industrial Reversible Double-Ended Adjustable
Manufactured from drop forged chrome vanadium steel. -
75mm BEARING SEPARATORRead moreKennedy Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes.
Jaw hardness: 42° – 45° HRC. -
8″ 2-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Pullers – 2 Jaw
Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what âspreadâ is needed this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. -
8″ 2/3-JAW DOUBLE ENDED MECHANICAL PULLERRead moreKennedy Mechanical Puller – Industrial Kits
2 & 3 Jaw Reversible/Double-Ended/Adjustable
Manufactured from chrome vanadium steel. Each kit contains the components to assemble a 2 or 3 jaw external or internal puller. The legs can be set at two different height positions.