Relaunch Promotion
Product Showcase
Category: Jacks & Stands
Jacks & Stands
Showing 1–16 of 28 results
-
1-TONNE SCISSOR JACKRead moreKennedy Scissor Jack
Made from heavy-duty steel with a rubber saddle which provides a positive grip and prevents damage to jacking points. Designed to safely raise vehicles. Easy to use and compact for easy storage. 1 Tonne (1000kg) safe working load. Wide base plate for extra stability.
Lifting range: 88 – 383mm.
Base plate size: 150 x 90mm.
Spindle thread: 12.5 x 2.5mm. -
1/2- TONNE TRANSMISSION JACKRead moreKennedy Telescopic Transmission Jack
Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3â dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875 to 1800mm.
Contents TTJ500
Capacity…1/2 Tonne
Ram Extensions…2
Minimum Saddle Height…875mm
Maximum Saddle Height…1800mm
Saddle Size…680x810mm
Chain Length…95mm
Saddle Tilt Forward…24â
Saddle Tilt Back…19â
Saddle Tilt Side…+/- 20â
Saddle Return Weight…15.8kg (35lbs)
Base…695 x 805mm
Weight…68.5kg -
10-TONNE TROLLEY JACKRead moreKennedy Heavy Duty Trolley Jacks
Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built-in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.
-
12- TONNE 465mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
15- TONNE 460mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
2- TONNE 345mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
2-TONNE LONG REACH TROLLEY JACKRead moreTrolley Jack
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved.
T238
Type: with case.
Dimensions: 525 x 225 x 145mm.
Maximum load: 2,000kg.
Minimum height: 130mm.
Maximum height: 380mm.T2.249
Type: with case.
Dimensions: 695 x 344 x 180mm.
Maximum load: 2,250kg.
Minimum height: 145mm.
Maximum height: 495mm.T280
Type: long reach.
Dimensions: 1150 x 360 x 210mm.
Maximum load: 2,000kg.
Minimum height: 140mm.
Maximum height: 800mm. -
2-TONNE LOW PROFILE LONGREACH TROLLEY JACKRead more2 Tonne Low Profile Long Reach Trolley Jack
Low Profile Long Reach Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. -
2-TONNE LOW PROFILE SERVICE JACKRead more2 Tonne Low Profile Service Trolley Jack
Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.
-
2-TONNE TROLLEY JACK WITH CASERead moreTrolley Jack
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved.
T238
Type: with case.
Dimensions: 525 x 225 x 145mm.
Maximum load: 2,000kg.
Minimum height: 130mm.
Maximum height: 380mm.T2.249
Type: with case.
Dimensions: 695 x 344 x 180mm.
Maximum load: 2,250kg.
Minimum height: 145mm.
Maximum height: 495mm.T280
Type: long reach.
Dimensions: 1150 x 360 x 210mm.
Maximum load: 2,000kg.
Minimum height: 140mm.
Maximum height: 800mm. -
2.1/4-TONNE TROLLEY JACKRead moreTrolley Jack
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved.
T238
Type: with case.
Dimensions: 525 x 225 x 145mm.
Maximum load: 2,000kg.
Minimum height: 130mm.
Maximum height: 380mm.T2.249
Type: with case.
Dimensions: 695 x 344 x 180mm.
Maximum load: 2,250kg.
Minimum height: 145mm.
Maximum height: 495mm.T280
Type: long reach.
Dimensions: 1150 x 360 x 210mm.
Maximum load: 2,000kg.
Minimum height: 140mm.
Maximum height: 800mm. -
2.5-TONNE LOW PROFILE TROLLEY JACKRead more2.5 Tonne Low Profile Trolley Jack
Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with
comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. -
20- TONNE 452mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
20/40- TONNE 2 STAGE HEAVY DUTY AIR JACKRead moreAir Trolley Jack – 20/40T 2 Stage
For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, ‘T’ bar handle with integral air control valve and two extensions for increased lifting height. It requires an air pressure of 116 – 174psi (8 – 12bar) and a supply rate of 105ltr/min (3.7cfm).
JTA2040
Air supply: 116 – 174psi (8 – 12bar).
Air consumption: 105ltr/min (3.7cfm).
Lifting capacity: 20T/40T.
Base height: 210mm.
Lifting height: 40T – 433mm, 20T – 520mm.
Air inlet size: 1/4NTP. -
3- TONNE 372mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
3- TONNE QUICK LIFT HYDRAULIC TROLLEY JACKRead moreKennedy 3 Tonne Quick Lift Trolley Jack
3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Constructed from heavy gauge steel. 1m, two-piece handle. 120mm diameter saddle. Automatic safety overload protection. Positive twist, lock and release mechanism. Heavy duty rear swivelling castor wheels.
Maximum load: 3000kg.
Minimum height: 145mm.
Maximum height: 490mm.