Showing 65–80 of 123 results

• 

  3.70mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  3.7mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  3.80mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  3.8mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  3.90mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  3.9mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  4.00mm CARBIDE S/S STUB DRILL

  Rp187.000

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.0mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  4.10mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.1mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  4.20mm CARBIDE S/S STUB DRILL

  Rp202.000

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.2mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more
• 

  4.30mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.40mm CARBIDE S/S STUB DRILL

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.50mm CARBIDE S/S STUB DRILL

  Rp202.000

  Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
  Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
  Manufactured to Works Standard.

  Read more
• 

  4.5mm CARBIDE S/S STUB DRILL

  Kennedy Solid Carbide Stub Drills – Metric

  Metric
  For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

  Tolerances:
  Cutting Dia. + 0.000mm – 0.015mm.
  Shank Dia. + 0.000mm – 0.030mm.

  Read more