Relaunch Promotion
Product Showcase
Category: Carbide End Mills - Long Series
Carbide End Mills - Long Series
Showing 1–16 of 29 results
-
0.6mm 2FL L/REACH B/N SLOT DRILL Q-COATRead moreCarbide Plain Shank Slot Drills 2 Flute Ball Nose – Carbide Q-Coat
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
Carbide Q-Coat.Series 73 – Long Reach
Carbide Q-Coat -
1.5mm 2FL L/REACH B/N SLOT DRILL Q-COATRead more
Carbide Plain Shank Slot Drills 2 Flute Ball Nose – Carbide Q-Coat
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
Carbide Q-Coat.Series 73 – Long Reach
Carbide Q-Coat -
10.0mm 3FL L/SERIES CARBIDE END MILLRp1.601.000Read moreKennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
10.0mm 4FL L/SERIES CARBIDE END MILLRp1.204.000Read moreKennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
10.0mm ST/SH LONG 4FL END MILL Q-COATRead moreSwissTech 4Carbide Plain Shank End Mills 4 Flute: Series 68, Long – Q-Coat Carbide
Series 68 – Long Series
Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
12.0mm 3FL L/SERIES CARBIDE END MILLRp2.352.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm 4FL L/SERIES CARBIDE END MILLRp1.694.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
12.0mm ST/SH LONG 4FL END MILL Q-COATRead more
SwissTech 4Carbide Plain Shank End Mills 4 Flute: Series 68, Long – Q-Coat Carbide
Series 68 – Long Series
Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
16.0mm 3FL L/SERIES CARBIDE END MILLRp4.569.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
16.0mm 4FL L/SERIES CARBIDE END MILLRp3.071.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
16.0mm ST/SH LONG 4FL END MILL Q-COATRead more
SwissTech 4Carbide Plain Shank End Mills 4 Flute: Series 68, Long – Q-Coat Carbide
Series 68 – Long Series
Dimensions to DIN 844. Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
2.0×16.0 2FL L/REACH B/N SLOT DRILL Q-COATRead more
Carbide Plain Shank Slot Drills 2 Flute Ball Nose – Carbide Q-Coat
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
Carbide Q-Coat.Series 73 – Long Reach
Carbide Q-Coat -
2.0×20.0 2FL L/REACH B/N SLOT DRILL Q-COATRead more
Carbide Plain Shank Slot Drills 2 Flute Ball Nose – Carbide Q-Coat
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
Carbide Q-Coat.Series 73 – Long Reach
Carbide Q-Coat -
20.0mm 4FL L/SERIES CARBIDE END MILLRead more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL L/SERIES CARBIDE END MILLRp585.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 4FL L/SERIES CARBIDE END MILLRp669.000Read more
Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.