Showing 1–16 of 56 results

• 

  1.0mm 4FL STANDARD CARBIDE END MILL

  Rp319.000

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

  4 Flute: Regular Series – Metric
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

  Read more
• 

  1.5mm 4FL STANDARD CARBIDE END MILL

  Rp319.000

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

  4 Flute: Regular Series – Metric
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

  Read more
• 

  1/16″ 4FL STANDARD CARBIDE END MILL

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

  4 Flute: Regular Series – Inch
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Inch Tolerances
  Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
  Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

  Read more
• 

  1/2″ 4FL STANDARD CARBIDE END MILL

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

  4 Flute: Regular Series – Inch
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Inch Tolerances
  Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
  Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

  Read more
• 

  1/4″ 4FL STANDARD CARBIDE END MILL

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

  4 Flute: Regular Series – Inch
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Inch Tolerances
  Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
  Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

  Read more
• 

  1/8″ 4FL STANDARD CARBIDE END MILL

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch

  4 Flute: Regular Series – Inch
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Inch Tolerances
  Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.000, -0.002.
  Diameter: Over 1/4” ~ up to 1”. Tolerance: +0.000, -0.003.

  Read more
• 

  10.0mm 4FL STANDARD CARBIDE END MILL

  Rp958.000

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

  4 Flute: Regular Series – Metric
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

  Read more
• 

  10.0mm 4FL STANDARD CARBIDE END MILL

  Rp829.000

  Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

  Regular Series
  For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

  Add to cart
• 

  10×0.5mm ST/SH 4FL C/RADIUS END MILL Q-COAT

  Carbide Plain Shank Corner Radius End Mills 4 Flute

  Centre cutting.
  To Manufacturers Standards.
  Cutting diameter to e8.
  Shank diameter to h6
  ECQ-4PR Carbide Q-Coat.

  Series 86 Regular Length

  Read more
• 

  10×1.0mm ST/SH 4FL C/RADIUS END MILL Q-COAT

  Carbide Plain Shank Corner Radius End Mills 4 Flute

  Centre cutting.
  To Manufacturers Standards.
  Cutting diameter to e8.
  Shank diameter to h6
  ECQ-4PR Carbide Q-Coat.

  Series 86 Regular Length

  Read more
• 

  10×1.5mm ST/SH 4FL C/RADIUS END MILL Q-COAT

  Carbide Plain Shank Corner Radius End Mills 4 Flute

  Centre cutting.
  To Manufacturers Standards.
  Cutting diameter to e8.
  Shank diameter to h6
  ECQ-4PR Carbide Q-Coat.

  Series 86 Regular Length

  Read more
• 

  10×2.0mm ST/SH 4FL C/RADIUS END MILL Q-COAT

  Carbide Plain Shank Corner Radius End Mills 4 Flute

  Centre cutting.
  To Manufacturers Standards.
  Cutting diameter to e8.
  Shank diameter to h6
  ECQ-4PR Carbide Q-Coat.

  Series 86 Regular Length

  Read more
• 

  11.0mm 4FL STANDARD CARBIDE END MILL

  Rp1.315.000

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

  4 Flute: Regular Series – Metric
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

  Read more
• 

  12.0mm 4FL STANDARD CARBIDE END MILL

  Rp1.417.000

  Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

  4 Flute: Regular Series – Metric
  Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

  Read more
• 

  12.0mm 4FL STANDARD CARBIDE END MILL

  Rp1.168.000

  Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

  Regular Series
  For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

  Metric Tolerances
  Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
  Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

  Read more
• 

  12×0.5mm ST/SH 4FL C/RADIUS END MILL Q-COAT

  Carbide Plain Shank Corner Radius End Mills 4 Flute

  Centre cutting.
  To Manufacturers Standards.
  Cutting diameter to e8.
  Shank diameter to h6
  ECQ-4PR Carbide Q-Coat.

  Series 86 Regular Length

  Read more