Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

Category: HSS Slot Drills - Long Series

HSS Slot Drills - Long Series

Showing 1–16 of 30 results

  • 10mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 11mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 12mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 13mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 14mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 15mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 16mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 17mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 18mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 19mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 2.5mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 20mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 25mmx25mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 2mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 3.5mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 30mmx25mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping