Showing 1–16 of 102 results

• 

  CCGT 060202-AL INSERT GRADE K10

  Rp229.000

  Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 060204-AL INSERT GRADE K10

  Rp256.000

  Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 060204-PF INSERT GRADE QX500

  Rp267.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 060204-PF INSERT GRADE QX520

  Rp267.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 09T302-AL INSERT GRADE K10

  Rp301.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 09T304-AL INSERT GRADE K10

  Rp262.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 09T304-PF INSERT GRADE QX500

  Rp322.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 09T304-PF INSERT GRADE QX520

  Rp322.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 09T308-AL INSERT GRADE K10

  Rp262.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 120402-AL INSERT GRADE K10

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 120404-AL INSERT GRADE K10

  Rp311.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCGT 120408-AL INSERT GRADE K10

  Rp311.000

  Yamaloy Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCMT 060202-PM INSERT GRADE QX500

  Rp171.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 060202-PM INSERT GRADE QX5020

  Rp171.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 060204-PM INSERT GRADE QX500

  Rp150.000

  Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCMT 060204-PM INSERT GRADE QX5030

  Rp178.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more