Showing 17–32 of 102 results

• 

  CCMT 060204-PM INSERT GRADE QX520

  Rp150.000

  Indexable Turning Inserts – CCGT

  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  CCMT 09T304-PM INSERT GRADE QX500

  Rp166.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 09T304-PM INSERT GRADE QX5030

  Rp207.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 09T304-PM INSERT GRADE QX520

  Rp166.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 09T308-PM INSERT GRADE QX500

  Rp166.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 09T308-PM INSERT GRADE QX5020

  Rp223.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CCMT 120404-PM INSERT GRADE QX5020

  Rp251.000

  Turning Inserts – CCMT

  Grades:
  QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  CNMG 120404-NF3 INSERT GRADE QX520

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  CNMG 120404-NM5 INSERT GRADE QX520

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  CNMG 120408-NF3 INSERT GRADE QX520

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  CNMG 120408-NM5 INSERT GRADE QX520

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  CNMG 120408-NM6 INSERT GRADE QX5030

  Rp191.000

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Add to cart
• 

  CNMG 120408-NM7 INSERT GRADE QX520

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  CNMG 120408-NSA INSERT GRADE QX8010

  Rp191.000

  Indexable Turning Inserts – CNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  DCGT 070204-AL INSERT GRADE K10

  Rp227.000

  Indexable Turning Inserts – DCGT

  Grades:
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  DCGT 11T302-AL INSERT GRADE K10

  Rp290.000

  Indexable Turning Inserts – DCGT

  Grades:
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more