Relaunch Promotion
Product Showcase
Category: Squares; Rules & Bevels
Squares; Rules & Bevels
Showing 1–16 of 17 results
-
12″ DIECAST COMBINATION SQUARE & RULERead moreKennedy Combination Squares
Multi-functional. Can be used as try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the 6â rule and diecast zinc alloy head with the 12â rule. Precision rolled blades.
-
12″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.
-
1M WOODEN FOLDING RULE YELLOW METRIC/INCHRead moreKennedy Beechwood Folding Rules
Made from beechwood for strength and flexibility and painted bright yellow. Metric and inch graduations, large, clear and deep for increased life and easy reading.
Sizes available: 1m x 5 folds: 2m x 10 folds.
Graduations: Metric – mm and cm (cm figures in red).
Inch – 1/16â, 1/8â, 1/4â, 1/2â, 1â. -
24″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.
-
24″x16″ RAFTERS SQUARERead moreKennedy Rafterâs Square
Manufactured from hardened and tempered ground steel. Graduated to 2mm on one side and 1/8â and 1/16â increments on the other. In hands of a skilled carpenter the simple rafterâs square becomes an indispensable calculating device of immense capacity. Enabling the carpenter to easily determine the length of any common, hip, valley or jack rafter for any pitch of roof. To make the proper cuts, top and bottom as well as slide or cheek cuts for any rafter.
-
2M WOODEN FOLDING RULE YELLOW METRIC/INCHRead moreKennedy Beechwood Folding Rules
Made from beechwood for strength and flexibility and painted bright yellow. Metric and inch graduations, large, clear and deep for increased life and easy reading.
Sizes available: 1m x 5 folds: 2m x 10 folds.
Graduations: Metric – mm and cm (cm figures in red).
Inch – 1/16â, 1/8â, 1/4â, 1/2â, 1â. -
39″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.
-
6″ CARPENTERS ROSEWOOD TRY SQUARERead moreKennedy Try & Mitre Squares
Used for marking out right angles and testing squareness. Rosewood stock with brass face for greater wear resistance. Blades are manufactured from hardened steel, and secured by steel washers with brass rivets. Solid rosewood stock with solid brass facing securely fixed to the stock provides a hard wearing contact edge.
-
6″ DIECAST COMBINATION SQUARE & RULERead moreKennedy Combination Squares
Multi-functional. Can be used as try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the 6â rule and diecast zinc alloy head with the 12â rule. Precision rolled blades.
-
6″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.
-
7.1/2″ CARPENTERS ROSEWOOD SLIDING BEVELRead moreKennedy Sliding Bevels
Used for marking regular and irregular angles. The 9â sliding steel blade can be locked into any position using the brass thumbscrew. Rosewood stock with brass tips for greater wear resistance.
-
9″ CARPENTERS ROSEWOOD SLIDING BEVELRead moreKennedy Sliding Bevels
Used for marking regular and irregular angles. The 9â sliding steel blade can be locked into any position using the brass thumbscrew. Rosewood stock with brass tips for greater wear resistance.
-
9″ CARPENTERS ROSEWOOD TRY SQUARERead moreKennedy Try & Mitre Squares
Used for marking out right angles and testing squareness. Rosewood stock with brass face for greater wear resistance. Blades are manufactured from hardened steel, and secured by steel washers with brass rivets. Solid rosewood stock with solid brass facing securely fixed to the stock provides a hard wearing contact edge.
-
ANGLE FINDER WITH MAGNETIC BASERead moreKennedy Angle Finder – Magnetic Base
Can be used independently as a âquick checkâ tool or to convert a rule or square into a precision angle finder. High strength built-in ceramic magnet with vee groove for use on bars and pipes. Accuracy ±0.5%. For the most accurate readings it is recommended that the angle finder is attached to a steel rule or square by means of the magnet or screws.
-
LOCKING NUT & MANDREL FOR 12″ COMBINATION SQUARERead moreKennedy Combination Squares
Multi-functional. Can be used as try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the 6â rule and diecast zinc alloy head with the 12â rule. Precision rolled blades.
-
SCRIBER FOR 12″ COMBINATION SQUARERead moreKennedy Combination Squares
Multi-functional. Can be used as try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the 6â rule and diecast zinc alloy head with the 12â rule. Precision rolled blades.