Relaunch Promotion
Product Showcase
Category: Punches - Pin; Centre; Nail & Taper
Punches - Pin; Centre; Nail & Taper
Showing 49–63 of 63 results
-
8mm LONG TAPER PUNCHRead moreKennedy Taper Punches
Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.
-
8mm STANDARD INSERTED PIN PUNCHRead moreKennedy Standard Length Inserted Pin Punches
Manufactured from chrome vanadium steel. Used for punching out pins and dowels.
-
AUTOMATIC CENTRE PUNCH & POCKET SCRIBERRp440.000Add to cartKennedy Automatic Centre Punch – Light Duty
Light Duty
Delivers a punch when head is depressed. Chrome vanadium tip with rubber sheathed steel body. -
AUTOMATIC CENTRE PUNCH-HEAVY DUTYRead moreKennedy Automatic Centre Punch – Heavy Duty
Heavy Duty
Strength of punch and depth of depression is adjustable by turning the knurled head. Delivers a punch between 6.3 to 22.5kg (14 to 50lb). -
AUTOMATIC CENTRE PUNCH-STANDARD DUTYRead moreKennedy Automatic Centre Punch – Standard Duty
Standard Duty
Strength of punch and depth of depression is adjustable by turning the knurled head. Delivers a punch between 2.25 to 13.5kg (5 to 30lb). -
CHROME VANADIUM CHISEL &PUNCH SET (14-PCE)Read moreYamoto Chisel & Punch Set
Chrome Vanadium Steel
Contents:
Pin Punches: 3/16â x 6â, 3/32â x 4 1/4â, 1/8â x 4 3/4â, 3/16â x 5 1/4â and 1/4â x 5 3/4â.
Centre Punches: 5/32â x 5â.
Chisels: 1/2â x 6â, 5/8â x 6 1/2â, 3/4â x 7 1/2â and 7/8â x 8â.
Taper Punches: 3/16â x 10â, 7/32â x 10â, 5/16â x 10â and 3/8â x 10â. -
EX/LENGTH INSERTED PIN PUNCHES 6-PCE SETRp655.000Add to cartKennedy Extra Length Inserted Pin Punches – Set
Manufactured from chrome vanadium steel. Used for punching out pins and dowels.
Set – Supplied in plastic wallet.
Contents: 2, 3, 4, 5, 6 and 8mm. -
EXTRA LENGTH INSERTED PIN PUNCH SET (5-PCE)Read moreKennedy Long Parallel Pin Punches With Air Grip – Set
Long Parallel Punch Set
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows. -
LONG TAPER PUNCH SET (4-PCE)Rp651.000Add to cartKennedy Taper Punch Set
Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.
Taper Punch Set
Contents: 1x 3, 4, 5, and 6mm. -
PARALLEL PIN PUNCH LONG SERIES SET OF 4Read moreKennedy Parallel Pin Punch Sets
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
Parallel Pin Punch Sets
Supplied in plastic wallet. -
PARALLEL PIN PUNCHES SET OF 6Read moreKennedy Parallel Pin Punch Sets
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
Parallel Pin Punch Sets
Supplied in plastic wallet. -
SPARE TIP FOR 518-175 CENTRE PUNCHRead moreKennedy Automatic Centre Punch – Light Duty
Light Duty
Delivers a punch when head is depressed. Chrome vanadium tip with rubber sheathed steel body. -
SQUARE HEAD CENTRE PUNCHES SET OF 4Rp256.000Add to cartKennedy Square Head Centre Punches – Set
Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece.
Conform to BS 3066.Set – Supplied in plastic wallet.
Contents: 1x 3.2, 4, 4.8 and 6.4 x 100mm. -
SQUARE HEAD NAIL PUNCHES SET OF 4Read moreKennedy Nail Punches – Set
Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip.
Conform to BS 3066. (Hardness: heads 42 HRC. Max: points 52 – 58 HRC).
Overall length: 100mm (4â).Set – Supplied in plastic wallet.
Contents: 1.6, 2.4, 3.2 and 4mm. -
STANDARD INSERTED PIN PUNCHES 6-PCE SETRp650.000Add to cartKennedy Standard Length Inserted Pin Punches – Set
Manufactured from chrome vanadium steel. Used for punching out pins and dowels.
Set – Supplied in plastic wallet.
Contents: 2, 3, 4, 5, 6 and 8mm.