Showing all 5 results

• 

  LDA500 LEAK DETECTOR SPRAY 500ml

  Sitesafe Leak Detector Spray

  LDA500
  This product is ideal for checking for even the most minute leaks in any gas or air pressurised systems including commercial vehicle air brakes and pressure vessels.
  It contains no alcohols or solvents, is not caustic and contains a rust inhibitor. Shake the can well then spray directly onto the suspect area using the extension tube and examine for bubbling which will indicate leakage. Size: 500ml aerosol.

  Read more
• 

  SF1-500B FLAW DETECTOR CLEANER SPRAY 500ml

  Flaw Detector Cleaner Spray

  SF1-500B
  Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.
  Size: 500ml

  Read more
• 

  SF2-500B FLAW DETECTOR DYE PENETRANT SPRAY 500ml

  Solent Flaw Detector Inspection System

  Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

  Read more
• 

  SF3-500B FLAW DETECTOR DEVELOPER SPRAY 500ml

  Flaw Detector Developer

  SF3-500B
  White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

  Read more
• 

  SL1-400A LEAK DETECTOR SPRAY COMPRESSED AIR 400ml

  Leak Detector Spray

  A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air – will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.

  Read more