Relaunch Promotion
Product Showcase
Category: Architectural Hardware
Architectural Hardware
Showing 289–304 of 410 results
-
No.5 SUFFOLK LATCH GALVANISEDRead moreSuffolk Latches
Suffolk latches complete with long thumb bit.
-
OUTSIDE ACCESS DEVICE SILVERRead morePanic Hardware
This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today’s market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer’s guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. Silver finish.
-
OVERHEAD DOOR CLOSER C/WBACK CHECK & DELAY PLATEDRead moreDoor Furniture
This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) – Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) – Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) – Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) – Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) – Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) – Corrosion-resistance:
?0? – indicates no defined corrosion-resistance,
?1? – indicates mild corrosion-resistance,
?2? – indicates a moderate level of corrosion-resistance,
?3? – indicates high corrosion-resistance,
?4? – indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.An example of the grading for a 1559 closer unit would be as follows:
3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6) -
OVERHEAD DOOR CLOSER C/WBACK CHECK & DELAY SILVERRead moreDoor Furniture
This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) – Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) – Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) – Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) – Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) – Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) – Corrosion-resistance:
?0? – indicates no defined corrosion-resistance,
?1? – indicates mild corrosion-resistance,
?2? – indicates a moderate level of corrosion-resistance,
?3? – indicates high corrosion-resistance,
?4? – indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.An example of the grading for a 1559 closer unit would be as follows:
3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6) -
P.BRASS PULL HANDLE BACKTO BACK FIX 150x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE BACKTO BACK FIX 225x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE BACKTO BACK FIX 300x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE BOLTFIX 150x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE BOLTFIX 225x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE BOLTFIX 300x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE CONCEALED FIX 150x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE CONCEALED FIX 225x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
P.BRASS PULL HANDLE CONCEALED FIX 300x19mmRead moreRoundbar Furniture
Polished Brass Pull Handles
Polished brass finish. 19mm roundbar pull handles. -
PANIC LATCH SILVERRead morePanic Hardware
This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today’s market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer’s guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. Silver finish.
-
POLISHED ST/STEEL ROUND BAR LEVER ON ROSE 19mmRead moreRoundbar Furniture
Stainless Steel Lever
19mm bar lever. Stainless steel and polished stainless steel finishes on 50mm concealed sprung rose. Supplied with face fixing and bolt through screws. -
PUSH BUTTON DIG LOCK KEYOVERIDE S/CHR.Read moreMatlock? DDL502 Mechanical Digital Door Lock
Matlock? security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.