Showing all 4 results

• 

  FCT076 76mm REVERSIBLE CUT-OFF TOOL

  Kobe™ Reversible Cut-Off Tool, 76mm

  FCT076
  For cutting auto panels, light sheet metal, fibreglass, nuts and bolts. Powerful 0.5HP motor. Speed regulator. Safety release throttle. Rear exhaust. Rotating air inlet. Reverse feature to allow for sparks to be deflected away from the work. Ball bearing construction for long tool life. Supplied with one 76mm cutting disc (KEN230-0020K).
  Disc size: 76 x 1.8 x 9.6mm (3” x 1/16” x 3/8”).
  Minimum air hose size (ID): 3/8” (10mm).
  Air inlet thread: 1/4” NPT.
  Air pressure: 90psi/6.2bar.
  Air consumption: 4cfm*.
  Sound pressure level: 98dBA.
  Sound power level: 103dBA.
  Vibration level: 0.5m/s2.
  Overall length: 185mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  NB160 HIGH PERFORMANCE AIR NIBBLER

  Kobe High Performance Air Nibbler

  NB160
  Produces burr free cuts without distortion. Ideal for body shop and sheet metal work, teasing throttle for precise control, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption and a cutting capacity of 1.6mm (steel) to 2.0mm (aluminium).
  Noise Level: 91dBA
  Sound Power: 104dBA
  Vibration: 5.9m/s
  Overall length: 180mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  NS4030 HEAVY DUTY AIR NEEDLE SCALER

  Kobe™ Heavy-Duty Needle Scaler

  NS4030
  10 needles for quick removal of rust, paint, scale, flux and corrosion. Slimline body. Lightweight. (For replacement scaling needles, please refer to parts drawing supplied with tool), 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
  Noise Level: 95dBA
  Sound Power: 109dBA
  Vibration: 12.8m/s
  Needle diameter: 3mm.
  Overall length: 250mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  SH120 RAPID CUTTING AIR METAL SHEAR

  Kobe™ Rapid Cutting Air Metal Shear

  SH120
  Produces burr-free cuts without distortion. Ideal for body shop and sheet metal work. Teasing throttle for precise control, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption, cutting capacity of 1.2mm steel to 1.6mm aluminium.
  Noise Level: 82dBA
  Sound Power: N/A dBA
  Vibration: 4.2m/s
  Overall length: 200mm.

  *Based on a 15 second cycle per minute average use.

  Read more