Showing 1–16 of 21 results

• 

  B3144 1/4″ (6mm) 90DEG ANGLE DIE GRINDER

  Kobe™ 90° Angle Die Grinder

  B3144
  Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
  Collet size: 1/4″ (6mm), 1/8″ (3mm).
  Free speed: 20,000rpm.
  Air pressure: 6.2bar (90psi).
  Air consumption: 4cfm* (113ltr/min).
  Air inlet thread: 1/4″ NPT.
  Minimum air hose size (ID): 10mm (3/8″).
  Overall length: 165mm.
  Noise Level: 90dBA
  Sound Power: 97dBA
  Vibration: 1.24m/s

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  B3244 1/4″ (6mm) 115 DEGANGLE DIE GRINDER

  Kobe™ 115° Angle Die Grinder

  B3244
  Reversible hardened steel 1/4” collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
  Collet size: 1/4” (6mm), 1/8” (3mm).
  Free speed: 20,000rpm.
  Recommended air pressure: 6.2bar (90psi).
  Air consumption: 4cfm* (113ltr/min).
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 10mm (3/8”).
  Overall length: 200mm.
  Noise Level: 90dBA
  Sound Power: 97dBA
  Vibration: 1.24m/s

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  B3456 1/4″ (6mm) STRAIGHT DIE GRINDER

  Kobe™ Straight Continuous Use Die Grinder

  B3456
  Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4″ collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

  Specifications:
  Drive size: 1/4″ (6mm), 1/8″ (3mm).
  Free speed: 25,000rpm.
  Air pressure: 6.2Bar (90PSI).
  Air consumption: 4CFM* (113ltr/min).
  Air inlet thread: 1/4″ NPT.
  Minimum air hose size (ID): 10mm (3/8″).
  Noise level: 91dBA.
  Sound power level: 98dBA.
  Vibration level#: 4.53m/s2.
  Overall length: 160mm.
  Weight: 0.6kg.
  ? Per Pneurop Standards EN 12366.
  # Per EN 28927-1.

  *Based on a 15 second cycle per minute average use

  Add to cart
• 

  B3555 1/4″ (6mm) EXT. STRAIGHT DIE GRINDER

  Kobe™ Extended Straight Die Grinder

  B3555
  Use for grinding, polishing, buffing and deburring. The extra length allows you to reach more confined areas. Reversible hardened steel 1/4″ collet. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

  Specifications:
  Model number: B3555
  Collet size: 1/4″ (6mm), 1/8″ (3mm).
  Free speed: 25,000rpm.
  Recommended air pressure: 6.2Bar (90PSI).
  Air consumption: 4CFM* (113ltr/min).
  Air inlet thread: 1/4″ NPT.
  Minimum air hose size (ID): 10mm (3/8″).
  Noise level: 91dBA.
  Sound power level: 98dBA.
  Vibration level#: 4.53m/s2.
  Overall length: 260mm.
  Net weight: 0.68kg.
  ?Per Pneurop Standard Per EN 12366.
  #Per EN 28927-1.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  FAG050M 50mm MINI GRINDER

  50mm Mini Angle Grinder

  FAG050M
  For metal dressing, rust removal, weld preparation and automotive
  bodywork fabrication in hard to reach areas. Speed regulator. Safety
  release throttle. Heavy duty disc guard. Side exhaust. Ball bearing
  construction. Supplied with: 2x A60 (KEN230-0040K), 1x A80
  (KEN230-0050K) and 1x A120 (KEN230-0060K) 50mm grinding discs.
  Disc size: 50 x 4 x 9.6mm (2” x 5/32” x 3/8”).
  Air inlet thread: 1/4” NPT. Minimum air hose
  size (ID): 3/8” (10mm).
  Air pressure: 90psi/6.3bar.
  Air consumption: 4cfm*.
  Sound pressure level: 83dBA.
  Sound power level: 92dBA.
  Vibration level: 1.7m/s2.
  Overall length: 140mm.
  *Based on a 15 second
  cycle per minute average use.

  Read more
• 

  FDG090 90 DEG ANGLE DIE GRINDER

  Kobe™ 90° Angle Die Grinder

  FDG090
  For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.
  Box contents: 90 angle die grinder, two collet spanners and comprehensive instructions.

  Specifications:
  Free speed: 22,000rpm.
  Collet size: 6mm.
  Air inlet thread: 1/4″ NPT.
  Minimum air hose size (ID): 3/8″ (10mm).
  Air pressure: 90PSI/6.2Bar.
  Air consumption: 4CFM*.
  Soun pressure level: 90dB(A).
  Sound power level: 97 db(A).
  Vibration level: 1.24 m/s2.
  Overall length: 160mm.
  Net weight: 500gm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  FDG115 115 DEG ANGLE DIEGRINDER

  Kobe™ 115° Angle Die Grinder

  FDG115
  For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. 115 angle head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.
  Box contents: 115° angle die grinder, two collet spanners and a comprehensive instruction manual.

  Specifications:
  Free speed: 22,000rpm.
  Collet size: 6mm.
  Air inlet thread 1/4″ NPT.
  Minimum air hose size: 3/8″ (10mm).
  Air pressure: 90PSI/6.2Bar.
  Air consumption: 4CFM*.
  Sound pressure level: 90dB(A).
  Sound power level: 97db(A).
  Vibration level: 1.05m/s2.
  Overall length: 195mm.
  Net weight: 524gm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  FDG180e EXTENDED SPINDLEDIE GRINDER

  Extended Spindle Die Grinder

  FDG180e
  For polishing, buffing, deburring and grinding. Rubber handle provides grip and comfort. Extended head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.
  Free speed: 25,000rpm.
  Collet size: 6mm.
  Air inlet thread: 1/4″ NPT.
  Minimum air hose size (ID): 3/8″ (10mm).
  Air pressure: 90PSI/6.2Bar.
  Air consumption: 4CFM*.
  Sound pressure level: 91dB(A).
  Sound power level: 98dB(A).
  Vibration level: 4.53m/s2.
  Overall length: 253mm.
  Net weight: 657gm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  FDG180m STRAIGHT DIE GRINDER

  Straight Die Grinder

  FDG180m
  For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Speed regulator, safety release throttle, rear exhaust, ball bearing construction for long tool life.
  Contents: mini die grinder, two collet spanners and instructions.
  Collet size: 1/4” (6mm).
  Air inlet thread: 1/4” NPT.
  Minimum air hose size (ID): 3/8” (10mm).
  Air pressure: 90psi/6.3bar.
  Air consumption: 4cfm* (144ltr/min).
  Sound pressure level: 91dBA.
  Sound power level: 98dBA.
  Vibration level: 4.53m/s2.
  Overall length: 158mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  FGD 4.1/2″ DISC GRINDER C/W SWIVEL GUARD

  Kobe™ Angle Grinder, 115 & 125mm

  Suitable for metal dressing, rust removal, weld preparation and automotive bodywork fabrication. Rubber-cushioned side handle provides grip and operator comfort.
  Free speed: 10,000rpm (governed).
  Spindle thread: M14 x 2.0mm.
  Air inlet thread: 1/4” NPT.
  Min. air hose size: 10mm (3/8”).
  Air pressure: 6.2bar (90psi).
  Motor power: 0.7hp.
  Air consumption: 4cfm* (113ltr/min).
  Sound power level: 92dBA.
  Sound pressure/noise level: 89dBA.
  Vibration level: 1.2m/s2.
  Overall length: 240mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  FGD 5″ DISC GRINDER C/W SWIVEL GUARD

  Kobe™ Angle Grinder, 115 & 125mm

  Suitable for metal dressing, rust removal, weld preparation and automotive bodywork fabrication. Rubber-cushioned side handle provides grip and operator comfort.
  Free speed: 10,000rpm (governed).
  Spindle thread: M14 x 2.0mm.
  Air inlet thread: 1/4” NPT.
  Min. air hose size: 10mm (3/8”).
  Air pressure: 6.2bar (90psi).
  Motor power: 0.7hp.
  Air consumption: 4cfm* (113ltr/min).
  Sound power level: 92dBA.
  Sound pressure/noise level: 89dBA.
  Vibration level: 1.2m/s2.
  Overall length: 240mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  GA1011L 100mm/4″ ANGLE GRINDER

  Kobe™ Angle Grinder, 100mm (4″)

  GA1011L
  Adjustable safety guard, safety lever throttle. Supplied with auxiliary side handle, flanges and spanners, lightweight and compact. 100 x 3 x 16mm cut-off disc.
  Air inlet thread: 1/4” NPT.
  Spindle thread: 3/8” – 24.
  Minimum air hose size: 10mm (3/8”).
  Air pressure: 6.3bar (90psi).
  Motor power: 0.7hp.
  Air consumption: 6cfm* (216ltr/min).
  Sound power level: 89dBA.
  Sound pressure/noise level: 96dBA.
  Vibration level: 4.0m/s2.
  Overall length: 230mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  GA1211L 115mm/4.1/2″ ANGLE GRINDER

  Angle Grinder, 115mm

  GA1211L
  Suitable for grinding, cutting-off and sanding. Safety lever throttle. Supplied with auxiliary side handle, flanges and spanners.
  115 x 3 x 22mm cut off disc.
  Air inlet thread: 1/4” NPT.
  Spindle thread: M10 x 1.5mm.
  Minimum air hose size: 10mm (3/8”).
  Air pressure: 6.3bar (90psi).
  Air consumption: 6cfm* (216ltr/min).
  Motor power: 0.7hp.
  Sound pressure level: 89dBA.
  Sound power level: 96dBA.
  Vibration level: 4.0m/s2.
  Overall length: 240mm.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  GA1807L 180mm HEAVY DUTYANGLE GRINDER

  180mm Heavy Duty Angle Grinder

  GA1807L

  Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard. For grinding only

  Free speed: 7000rpm.
  Grinding disc size: 180×6.3×22.2mm.
  Air inlet thread: 1/4″ NPT.
  Air hose size (ID): 10mm.
  Air pressure: 90PSI.
  Air consumption: 6,1/2 CFM*
  Overall length: 340mm.
  Weight: 3.6kg.
  Sound power level: 109dB(A).
  Sound Pressure/ Noise level: 103dB(A).
  Vibration level: 2.6m/s.

  *Based on a 15 second cycle per minute average use.

  Read more
• 

  GD2206L DIE GRINDER WITHSAFETY THROTTLE

  Kobe™ Straight Die Grinder

  GD2206L
  1/2hp motor delivers 22,000 precisely controllable rpm in the palm of your hand making it ideally suitable for polishing, buffing and grinding. The robust and durable single piece aluminium body houses the 1/2hp motor and precision balanced bearings provide reliability in the most demanding of industrial/automotive applications. The trigger has a safety catch to prevent accidental starts.
  Collet size: 6mm.
  Air inlet thread: 1/4” NPT.
  Air hose size (ID): 10mm.
  Air pressure: 90psi.
  Air consumption: 4cfm*.
  Noise level: 93dBA.
  Sound power level: 103dBA.
  Vibration: 5.4m/s.
  Overall length: 170mm.

  *Based on a 15 second cycle per minute average use.

  Add to cart
• 

  GD22LK 6mm AIR DIE GRINDER KIT

  Kobe™ Die Grinder Kit

  GD22LK
  Includes: GD2206L Straight Die Grinder (as shown ???). With 3 and 6mm collets, 10 assorted mounted points and robust blow moulded case.

  Add to cart