Relaunch Promotion
Product Showcase
Category: Clamping Sets
Clamping Sets
Showing all 14 results
-
071/102 TK12 M12-14mm T-SLOTCLAM PING KIT (58-PC)Add to cartIndexa T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off. -
1/2″x3/8″x16TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
12mmxM10 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
14mmxM12 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
16mmxM14 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
18mmxM14 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
20mmxM16 T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Metric
58 Pieces Metric Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
3/4″x5/8″x11TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
5/8″x1/2″x13TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
9/16″x1/2″x13TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
TK10 M10-12mm T-SLOT CLAMPING KIT (58-PC)Read moreIndexa T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off. -
TK14 M14-16mm T-SLOT CLAMPING KIT (58-PC)Read moreIndexa T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off. -
TK16 M16-18mm T-SLOT CLAMPING KIT (58-PC)Read moreIndexa T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off. -
TK18 M18-20mm T-SLOT CLAMPING KIT (58-PC)Read moreIndexa T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off.