Archives: Products
Showing 1649–1664 of 23773 results
-
1/8″ A/F HEXAGON BALL DRIVERRead moreKennedy Hexagon Ball Drivers – Inch
Inch
Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. -
1/8″ A/F HEXAGON L-WRENCH BALL DRIVERRead moreKennedy Ball Driver L-Wrenches – Inch
Inch
Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish. -
1/8″ A/F HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Inch – Standard Length
Inch – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
1/8″ A/F LONG ARM HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches, Long Arm – Inch
Inch – Long Arm
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
1/8″ BSP 45 DEG ANGLE HYDRAULIC NIPPLESRead moreKennedy Hydraulic Grease Nipples – 45° Type
For use with Kennedy grease guns and all other hydraulic grease equipment.
-
1/8″ BSP 90 DEG ANGLE HYDRAULIC NIPPLESRead moreHydraulic Grease Nipples – 90° Type
For use with Kennedy grease guns and all other hydraulic grease equipment.
-
1/8″ BSP STRAIGHT HOOK-ON NIPPLESRead moreHydraulic Grease Nipples – Straight Hook-On
For use with Kennedy grease guns and all other hydraulic grease equipment.
-
1/8″ BSP STRAIGHT HYDRAULIC NIPPLESRead moreHydraulic Grease Nipples – Straight-Type
For use with Kennedy grease guns and all other hydraulic grease equipment.
-
1/8″ CARBIDE S/S JOBBER DRILLRead moreSherwood Solid Carbide Jobber Drills – Inch
Series J102 – Inch
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338. -
1/8″ CARBIDE S/S JOBBER DRILLRead moreKennedy Solid Carbide Jobber Drills – Inch
Inch Sizes
For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, BS 328. -
1/8″ DIA COBALT DRILL FOR STAINLESS STEELRp37.000Read moreKennedy HSS-Co 8% Heavy Duty Drills, Straight Shank – Inch
Inch
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B. -
1/8″ DIA HSS S/S R-F JOBBER DRILLRp57.000Read moreHSS Roll Forged Jobber Drills – Inch
Inch
Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required. Manufactured to BS 328 : Part 1 : 1986 & DIN 338 Type N. -
1/8″ DIA. x 3″ COBALT TOOLBITRead moreHSS Cobalt Toolbits
5% Cobalt Round Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/8″ DIE FOR KEN5607800K HOLE PUNCHRead moreKennedy Power Hole Punch Kit
This 14 piece punch kit is suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.
Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes.
Adjustable depth gauge. Suitable for materials up to 14 gauge. Die and punch sizes: 2.38, 3.18, 3.97, 4.76, 5.56, 6.35, & 7.14mm. (3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 9/32″)
-
1/8″ HEX SOCKET BIT 3/8″SQ DRRead moreKennedy Screwdriver Bit Sockets, 3/8″
Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining grooves. Conform to DIN standards.
-
1/8″ HSS S/S BRIGHT JOBBER DRILLRp126.000Read moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.