Archives: Products
Showing 161–176 of 23773 results
-
0.95mm HSS S/S JOBBER DRILLRp78.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.98mm HSS S/S JOBBER DRILLRp78.000Read moreSherwood HSS Jobber Drills Steam Tempered – Metric
Series J100 – Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
0.9Mx1.5M ORTHO LIGHT CHARCOALRead moreSitesafe Anti-Fatigue Matting: Ortho Lite
Standing on a hard floor for prolonged periods without anti-fatigue matting can cause pain and discomfort in the lower legs, feet and back. Fatigue reduces concentration and therefore productivity. Anti-fatigue matting will increase comfort and productivity for workers who stand for long periods and substantially reduces stress, tiredness, aches and pains from standing on hard floors at work. Introducing anti fatigue matting into the workplace can provide staff with a more comfortable environment, which in turn encourages increased efficiency, concentration and productivity.
Ortho Lite
Cost effective anti fatigue matting. Offers the user relief from fatigue caused by standing. Insulates against cold concrete floors. Ideal for use in dry environments. Pebble
surface provides additional traction.
Colour: charcoal.
Thickness: 6mm. -
0.9Mx1.5M WORK MATRead moreSitesafe Anti-Fatigue Matting: Work Mat
Standing on a hard floor for prolonged periods without anti-fatigue matting can cause pain and discomfort in the lower legs, feet and back. Fatigue reduces concentration and therefore productivity. Anti-fatigue matting will increase comfort and productivity for workers who stand for long periods and substantially reduces stress, tiredness, aches and pains from standing on hard floors at work. Introducing anti fatigue matting into the workplace can provide staff with a more comfortable environment, which in turn encourages increased efficiency, concentration and productivity.
Work Mat
Hard-wearing SBR rubber construction. Raised circular surface for superior slip resistance – suitable for wet conditions. Features a moulded bevelled edge to reduce tripping. Conforms to Slip Resistance Test EN13552 Category R10.
Colour: black.
Thickness: 14mm. -
0.9Mx1.82M ORTHO LIGHT CHARCOALRead moreSitesafe Anti-Fatigue Matting: Ortho Lite
Standing on a hard floor for prolonged periods without anti-fatigue matting can cause pain and discomfort in the lower legs, feet and back. Fatigue reduces concentration and therefore productivity. Anti-fatigue matting will increase comfort and productivity for workers who stand for long periods and substantially reduces stress, tiredness, aches and pains from standing on hard floors at work. Introducing anti fatigue matting into the workplace can provide staff with a more comfortable environment, which in turn encourages increased efficiency, concentration and productivity.
Ortho Lite
Cost effective anti fatigue matting. Offers the user relief from fatigue caused by standing. Insulates against cold concrete floors. Ideal for use in dry environments. Pebble
surface provides additional traction.
Colour: charcoal.
Thickness: 6mm. -
00 ZINC PLATED HOSE CLIPSRead moreZinc-Plated Hose Clips
Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.
-
000 ZINC PLATED HOSE CLIPSRead moreZinc-Plated Hose Clips
Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.
-
003204 100mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 125mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 160mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 200mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 250mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 315mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003204 80mm 3-JAW C/I CHUCK REAR MOUNTRead moreIndexa Self-Centring Geared Scroll Lathe Chucks – Model 003-204
Model 003-204 – Rear mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003274 100mm 3-JAW C/I CHUCK FRONT MOUNTRead moreSelf-Centring Geared Scroll Lathe Chucks – Model 003-274
Model 003-274 – Front mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.
-
003274 125mm 3-JAW C/I CHUCK FRONT MOUNTRead moreSelf-Centring Geared Scroll Lathe Chucks – Model 003-274
Model 003-274 – Front mounting
Cast Iron 3 Jaw Plain Back Chuck
DIN 6350 (form A).
Three jaw plain back with adaptor recess.Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws – internal and external stepped.