Archives: Products
Showing 1777–1792 of 23773 results
-
10-TONNE TROLLEY JACKRead moreKennedy Heavy Duty Trolley Jacks
Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built-in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.
-
10.0 37DEG HIGH HELIX 3FL ROUGH E/MILL-ALUMRead moreSwissTech HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 20, Regular – Uncoated
Series 20 – Regular Length
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated
Series 15 – Regular Length
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 50DEG WELDON STD HIGH HELIX END MILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank 50° High Helix End Mills 3 Flute: Series 13, Regular – Uncoated
Series 13 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG 2FL BALL NOSE S/DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Ball Nosed Slot Drills 2 Flute: Series 40, Long – Uncoated
Series 40 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG 2FL SLOT DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 30, Long – TiCN Coated
Series 30 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG 3FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- Uncoated
Series 34 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG 3FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- TiALN Coated
Series 34 – Long Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG 3FL SLOT DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 34, Long- TiCN Coated
Series 34 – Long Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR LONG END MILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 37, Long – Uncoated
Series 37 – Long Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR SHORT 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated
Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR SHORT 2FL SLOT DRILL-TICN-8% CORead more
SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – TiCN Coated
Series 28 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR SHORT 3FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 32, Short – Uncoated
Series 32 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR SHORT 3FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 32, Short – TiALN Coated
Series 32 – Short Series, TiALN Coated
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR STD 3FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 33, Regular – Uncoated
Series 33 – Regular Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
10.0 SCR STD 3FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 33, Regular – TiALN Coated
Series 33 – Regular Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).