Archives: Products
Showing 1889–1904 of 23773 results
-
10.00mm x 500mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
10.00mm x 90DEG CARBIDE SPOTTING DRILLRp560.000Read moreSherwood Solid Carbide Spotting Drills – 90°
Designed for close tolerance hole location. Suitable for continuous production on aluminium, plastics, free cutting steels, cast iron, titanium and some aerospace materials. The stability of carbide makes the tool more rigid and less likely to deflect, maintaining a higher level of accuracy. Operators should note that continuous heavy shock loading may cause the tool to fail due to its brittleness.
-
10.00mm YELLOW BLADE TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Blade Connector Terminals
Blade Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
10.00mm YELLOW RING TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Fork Connector Terminals
Fork Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
10.00x203mm O/A HSS T/S SP/FL MACHINE REAMERRp4.411.000Read moreTaper Shank Extra Length Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328-4 -
10.00x254mm O/A HSS T/S SP/FL MACHINE REAMERRp5.450.000Read more
Taper Shank Extra Length Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328-4 -
10.0m HSS-COBALT L/S KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
Long Series
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. -
10.0M IND’ LOAD STRAP DOUBLE HOOK 4000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
10.0M IND’ LOAD STRAP DOUBLE HOOK 5000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
10.0mm (SET OF 27) LETTER PUNCHESRead moreHand Stamps
Positive Indent (Standard)
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. -
10.0mm (SET OF 27) LETTER PUNCHESRead moreSenator Letter & Number Stamps
Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 – 60HRC.
Type of characters according to DIN 1451. -
10.0mm (SET OF 9) FIGUREPUNCHESRead moreHand Stamps
Positive Indent (Standard)
Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. -
10.0mm (SET OF 9) FIGUREPUNCHESRead moreSenator Letter & Number Stamps
Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 – 60HRC.
Type of characters according to DIN 1451. -
10.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Metric
Regular Series – 2 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
10.0mm 2FL BALL NOSE CARBIDE SLOT DRILLRp772.000Read moreSherwood Carbide Micrograin Plain Shank Slot Drills 2 Flute Ball Nosed
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
10.0mm 2FL CARBIDE AL-KARB MILLING CUTTERRead moreKennedy Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric
Short Series – 2 Flute – Metric
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materialÂs as the flute design allows maximum chip removal.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.