Archives: Products
Showing 20945–20960 of 23773 results
-
No.4x55mm PHILLIPS S/DRIVER SOCKET BIT 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
No.5 3mm INTERCHANGEABLESTAMPRead moreKennedy Individual Nickel-Plated Carbon Steel Founts
Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.
-
No.5 9.5x25mm AL/OX STRAIGHT CARTRIDGE ROLL P80Read moreYork Cartridge Rolls – Straight Type
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.
Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.5 ARTIST BRUSHRead moreArtist’s Pencil Brushes – Plastic Handled – Medium Point
Plastic Handled – Medium Point
With pure bristles. Each brush is marked with its size. Medium point. -
No.5 BAx13/16″ O/D HSS DIERead moreBAâ(British Association) HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external screw threads. -
No.5 CARBIDE CENTRE DRILLRp1.643.000Read moreKennedy Carbide Centre Drills
Inch Series
Used to produce 60 centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled. Manufactured to BS328. 60° inclusive angle. 118° drill point.Tolerances:
Cutting diameter 0.0005″.
Shank diameter 0.0010″. -
No.5 JACK PLANERead moreSenator Jack Plane
No. 5
Fully adjustable metal plane for stock removal and truing up long edges or levelling wide boards. Kidney shaped lever cap screw hole prevents accidental slippage of cutter. High performance carbon steel blade. hardened and tampered to retain a keen cutting edge. Fully adjustable frog for all tasks and timber types. Virtually unbreakable polypropylene handle and knob shaped for comfort. Finger tip adjustment for depth of cut and cutter alignment. Tight fitting spring steel cap iron for optimum shaving flow. Cast fine grey iron base for stability and wear resistance. Precision ground base and sides ensure performance to the highest tolerances. -
NO.5 SCREW EXTRACTORRp74.000Read moreIndustrial Quality Screw Extractors
Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component.
-
-
No.5 SUFFOLK LATCH GALVANISEDRead moreSuffolk Latches
Suffolk latches complete with long thumb bit.
-
No.5 TORQ SET 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Torq® Sets
Torq® Sets
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
No.5 TRI-WING 1/4″ STD HEX S/DRIVER BITSRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Tri-Wing
Tri-Wing
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
No.50 12x12mm R/H HSS BUTT WELDED LATHE TOOLRp1.323.000Read moreButt-Welded Lathe Tools – No.50
Boring Tools – No.50 Right Hand
Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Shape No.50 – Rake & Clearance Angles
Top Rake: 5°. Front Clearance: 6°. Approach Angle: -1°. Trail Angle: 4°. Side Clearance: 6°. Corner Radius: -3°. Cutting Angle: 30°. -
No.50 16x16mm R/H HSS BUTT WELDED LATHE TOOLRp1.867.000Read moreButt-Welded Lathe Tools – No.50
Boring Tools – No.50 Right Hand
Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Shape No.50 – Rake & Clearance Angles
Top Rake: 5°. Front Clearance: 6°. Approach Angle: -1°. Trail Angle: 4°. Side Clearance: 6°. Corner Radius: -3°. Cutting Angle: 30°. -
No.500 CABLE STRIPPER/SCREWDRIVER/VOLT TESTERRead moreKennedy No.500 Cable Stripper/Screwdriver/Volt Tester
The newly developed Multi-Stripper PLUS, screwdriver, voltage tester, stripper for conductors, round and coaxial cables and cutter in only one tool. Screwdriver: two double ended bits: No.1PZ and 8855; x 3.5 slotted No.2PZ and 8855: x 4.0 slotted bit storage inside ergonomic dual material handle. Voltage tester: 110 – 250V. Round cable stripper: capacity 8 – 13mm dia (eg NYM 3x 1.5mm – 5x 2.5mm). Built-in side cutter: for PVC-isolated round cables max.
9mm dia. Coax stripper: two or three-level stripping of all common coaxial cables of
4.8 – 7.5mm dia. Wire stripper: for all common stranded and solid conductors
0.5mm (20AWG) to 6.0mm (10AWG). -
No.50A 12x12mm R/H HSS BUTT WELDED LATHE TOOLRp1.428.000Read moreButt-Welded Lathe Tools – No.50A
Internal Screw Cutting Tools – Right Hand
Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Shape No.50A – Rake & Clearance Angles
Top Rake: 5°. Front Clearance: 6°. Approach Angle: 0°. Trail Angle: 1°. Side Clearance: 1°. Corner Radius: -°.
