Archives: Products
Showing 20977–20992 of 23773 results
-
No.6 BAx13/16″ O/D HSS DIERead moreBAâ(British Association) HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external screw threads. -
No.6 CARBIDE CENTRE DRILLRp2.663.000Read moreKennedy Carbide Centre Drills
Inch Series
Used to produce 60 centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled. Manufactured to BS328. 60° inclusive angle. 118° drill point.Tolerances:
Cutting diameter 0.0005″.
Shank diameter 0.0010″. -
No.6 FLAT FITCH BRUSHRead moreFitch Brushes
Natural white bristle flat fitch paint brush with long natural wooden handle and steel ferrule. Ideal for âcutting-inâ to corners and windows, painting coving and other detail painting, or used dry to clean/dust on delicate objects or hard to access areas.
-
No.6 PLASTIC HANDLE SASH TOOLRead morePlastic Handle Sash Tools
Plastic handle. Ideal for cleaning out sawdust, swarf etc.
-
No.6 ROUND FITCH BRUSH NATURAL WOODEN HANDLERead moreFitch Brushes
Natural white bristle flat fitch paint brush with long natural wooden handle and steel ferrule. Ideal for âcutting-inâ to corners and windows, painting coving and other detail painting, or used dry to clean/dust on delicate objects or hard to access areas.
-
NO.6 SCREW EXTRACTORRp113.000Add to cartIndustrial Quality Screw Extractors
Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component.
-
No.6 TORQ SET 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Torq® Sets
Torq® Sets
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
No.6 TRI-WING 1/4″ STD HEX S/DRIVER BITSRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Tri-Wing
Tri-Wing
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
-
No.6-20 7PCE MASONRY DRILL SETRp97.000Add to cartRotary Masonry Drill Bit Sets
7 Piece – Standard Length
Standard Length: No.6 x 75, No.8 x 85, No.10 x 85, No.10A x 100, No.12 x 100, No.16 x 120, No.20 x 120mm.7 Piece – Standard &âMedium Length
Standard Length: No.10 x 85, No.12 x 100, No.14 x 100, No.16 x 120, No.20 x 120.
Medium Length: No.24 x 150, No.26 x 150mm.16 Piece – Standard &âMedium Length
Standard Length: No.6 x 75, No.8 x 85, No.10 x 85, No.10A x 100, No.14 x 100, No.16 x 120, No.18 x 120, No.20 x 120.
Medium Length: No.8 x 150, No.10 x 150, No.10A x 150, No.14 x 150, No.16 x 150, No.18 x 150, No.20 x 150, No.24 x 150mm. -
No.6-24 16PCE MASONRY DRILL SETRp273.000Add to cartRotary Masonry Drill Bit Sets
7 Piece – Standard Length
Standard Length: No.6 x 75, No.8 x 85, No.10 x 85, No.10A x 100, No.12 x 100, No.16 x 120, No.20 x 120mm.7 Piece – Standard &âMedium Length
Standard Length: No.10 x 85, No.12 x 100, No.14 x 100, No.16 x 120, No.20 x 120.
Medium Length: No.24 x 150, No.26 x 150mm.16 Piece – Standard &âMedium Length
Standard Length: No.6 x 75, No.8 x 85, No.10 x 85, No.10A x 100, No.14 x 100, No.16 x 120, No.18 x 120, No.20 x 120.
Medium Length: No.8 x 150, No.10 x 150, No.10A x 150, No.14 x 150, No.16 x 150, No.18 x 150, No.20 x 150, No.24 x 150mm. -
No.6BA HSS GT SPIRAL FLUTE TAPRead moreSpiral Flute
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
For all technical and dimensional specifications please refer to our catalogue.
-
No.6BA HSS GT STR. FLUTE PLUG TAPRead moreSherwood BA (British Association) HSS Ground Thread Taps, Straight Flute Individual Sizes – Plug
ISO 529 – 1975 (E) – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
No.6BA HSS GT STR. FLUTE SECOND TAPRead more
Sherwood BA (British Association) HSS Ground Thread Taps, Straight Flute Individual Sizes – Second
ISO 529 – 1975 (E) – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
-
No.6BA HSS GT STR. FLUTE TAPER TAPRead more
BA (British Association) HSS Ground Thread Taps
ISO 529 – 1975 (E) – Straight Flute Individual Sizes – Taper.
