Archives: Products
Showing 2113–2128 of 23773 results
-
10″ WOBBLE EXTENSION BAR 3/8″ SQ DRRead moreKennedy Extension Bars, 3/8″ – Wobble
Wobble
In areas where clearance may be a problem the âwobbleâ square drive can be used at an angle of up to 15°.Manufactured from high quality chrome vanadium with a fully polished finish. All with knurled âfinger gripâ.
-
-
10″ WOBBLE EXTENSION BAR1/2″ SQ DRRead moreKennedy Extension Bars, 1/2″ – Wobble
Wobble
In areas where clearance may be a problem the âwobbleâ square drive can be used at an angle of up to 15°.Manufactured from high quality chrome vanadium with a fully polished finish. With knurled âfinger gripâ.
-
10″(250mm) CABINET BASTARD RASPRp123.000Read moreRasp Cut Files – Cabinet
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) CABINET SECOND RASPRead moreRasp Cut Files – Cabinet
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HALF ROUND BASTARD RASPRp144.000Read moreRasp Cut Files – Half Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HALF ROUND SECOND RASPRp144.000Read moreRasp Cut Files – Half Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HALF ROUND SMOOTH RASPRp144.000Read moreRasp Cut Files – Half Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HAND BASTARD RASPRp82.000Read moreRasp Cut Files – Hand
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HAND SECOND RASPRp82.000Read moreRasp Cut Files – Hand
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) HAND SMOOTH RASPRp82.000Read moreRasp Cut Files – Hand
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) ROUND BASTARD RASPRp72.000Read moreRasp Cut Files – Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) ROUND SECOND RASPRp72.000Read moreRasp Cut Files – Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(250mm) ROUND SMOOTH RASPRp72.000Read moreRasp Cut Files – Round
Series of individual teeth which are formed by a single pointed tool. Produces a rough cut that is used primarily on wood, hooves, aluminium and lead.
Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.Key to cut numbers: 1 = Smooth; 2 = Second; 3 = Bastard
-
10″(255mm) HAND CURVED TOOTH MILLED FILERp240.000Read moreCurved Tooth Files
Curved Cut
Teeth are arranged in curved contours across the file face. Normally used in automotive body shops for smoothing body panels. -
10″(255mm) HAND STRAIGHT TOOTH MILLED FILERp268.000Read moreMilled Tooth Hand Files
Manufactured from alloy steel and featuring undercut teeth that produce a more aggressive cut than conventional files and require less operator effort. Suitable for use on a wide variety of materials including aluminium, steels, alloys, brass, copper, wood, plastics etc. Available as standard cut in four blade lengths and two tooth forms. Other styles are available on request.
Please note: Handles are not supplied as standard and should be ordered separately as required.
Straight Tooth
