Archives: Products
Showing 21345–21360 of 23773 results
-
PANEL SEAM SPLITTER SET 3-PCERead more3 Piece Panel Seam Splitter Set
Ideal for separating spot-welded panels during repairs. Stainless steel coated chrome vanadium with through tang shafts allow use with hammers. Dual material soft grip handles for comfort and control. Includes 90°, curved and straight seam splitters. Cushioned handle absorbs any shock from hammer blows. Made from super tough alloy steel.
-
PANIC LATCH SILVERRead morePanic Hardware
This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today’s market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer’s guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. Silver finish.
-
PANTHER BLACK SPECS CLEAR LENS IMPACT/ANTI-FOGRead moreKennedy Personal Protection Safety Spectacles
Low energy impact protection. Ultra light non-allergenic frame with low friction length adjustment at the temples and front angle adjustment. One piece, anti-scratch, clear polycarbonate lens with built in side shields for increased lateral protection. Class 1 optical quality. Arms have hang cord attachment points.
Black universal hang cord KEN-960-9620K.
Spring shut black spectacle case KEN-960-9560K. -
PARALLEL PIN PUNCH LONG SERIES SET OF 4Read moreKennedy Parallel Pin Punch Sets
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
Parallel Pin Punch Sets
Supplied in plastic wallet. -
PARALLEL PIN PUNCHES SET OF 6Read moreKennedy Parallel Pin Punch Sets
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
Parallel Pin Punch Sets
Supplied in plastic wallet. -
PARTIAL HARD CASE KNEE PADRead morePartial hard case knee pads
Quick release hook-n-loop fastening
One size fits all
Flexible straps prevent binding behind the knee
Non-marring face protects surfaces
Foam cushion beneath cap absorbs impact -
PARTING OFF TOOLHOLDER FOR T.0/T.1 TOOLPOSTRead moreIndexa Toolholders for Quick Change Toolposts – Parting Off Type
Parting Off Type
-
PARTING OFF TOOLHOLDER FOR T.2 TOOLPOSTRead moreIndexa Toolholders for Quick Change Toolposts – Parting Off Type
Parting Off Type
-
PASTE TABLE WOODEN HARDBOARD 1780x560x750mmRead moreWooden Paste Table
Strong, stable, pasting table with a lightweight, wooden construction and wipe clean hardboard surface. Simple to erect and fold away and has a carry handle for easy transportation. Dimensions: 1780 x 560 x 750mm.
-
PCBNL 2525M12 EXTERNAL TOOLHOLDERRead moreIndexa Lever Lock External Toolholders – PCBN R/L
75° approach for negative 80° rhombic inserts.
-
PCBNR 2525M12 EXTERNAL TOOLHOLDERRead more
Indexa Lever Lock External Toolholders – PCBN R/L
75° approach for negative 80° rhombic inserts.
-
PCK010B CHEMICAL SPILLKIT 10LTR HOLDALLRead more10 ltr Kits – In Holdalls
Many situations require a permanent supply of absorbents to be on hand. Solent Plus⢠spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.
For quick response to smaller spills.
Kits contain:
⢠10 x Solent Prime Pads (1 ltr/pad)
⢠1 x Solent Plus 1.2m sock (4 ltr/sock)
⢠1 x 1kg Putty Seal pre-mixed drum plug mix (SOL-741-2880R)
⢠2 x Disposal bags and ties (LUT-741-6430D)⢠Maintenance – Absorbs All Fluids – Grey/Black
For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
⢠Oil-Only – Repels Water – White
Hydrophobic absorbent can be used on water. Will float even when oil laden.
⢠Chemical (Universal) – Yellow
For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. -
PCK015B CHEMICAL SPILLKIT 15LTRRead more15 ltr Kits – In Carriers
Many situations require a permanent supply of absorbents to be on hand. Solent Plus⢠spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.
Kits contain:
⢠12 x Solent Prime pads (1 ltr/pad)
⢠1 x Solent Plus 1.2m sock (4 ltr/sock)
⢠1 x Disposal bag and tie (LUT-741-6430D)⢠Maintenance – Absorbs All Fluids – Grey/Black
For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
⢠Oil-Only – Repels Water – White
Hydrophobic absorbent can be used on water. Will float even when oil laden.
⢠Chemical (Universal) – Yellow
For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. -
PCK020C CHEMICAL SPILLKIT 20LTR HOLDALLRead more20 ltr Kits – In Holdalls
Many situations require a permanent supply of absorbents to be on hand. Solent Plus⢠spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.
Kits contain:
⢠15 x Solent Prime pads (1 ltr/pad)
⢠2 x Solent Plus 1.2m sock (4 ltr/sock)
⢠2 x Disposal bags and ties (LUT-741-6430D)⢠Maintenance – Absorbs All Fluids – Grey/Black
For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
⢠Oil-Only – Repels Water – White
Hydrophobic absorbent can be used on water. Will float even when oil laden.
⢠Chemical (Universal) – Yellow
For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. -
PCK025A CHEMICAL SPILLKIT 25LTR SMALL BINRead more25 ltr Kits – In Small Bins
Many situations require a permanent supply of absorbents to be on hand. Solent Plus⢠spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.
Kits contain:
⢠17 x Solent Prime pads (1.0 ltr/pad)
⢠1 x Solent Plus 1.2m sock (4 ltr/sock)
⢠2 x Solent Plus pillows (3.5 ltr/pillow)
⢠4 x Disposal bags and ties (LUT-741-6430D)⢠Maintenance – Absorbs All Fluids – Grey/Black
For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
⢠Oil-Only – Repels Water – White
Hydrophobic absorbent can be used on water. Will float even when oil laden.
⢠Chemical (Universal) – Yellow
For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. -
PCK050S CHEMICAL SPILLKIT 50LTR HOLDALLRead more50 ltr Kits – In Holdalls
Many situations require a permanent supply of absorbents to be on hand. Solent Plus⢠spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.
Kits contain:
⢠35 x Solent Prime pads (1.0 ltr/pad)
⢠3 x Solent Plus 1.2m sock (4 ltr/sock)
⢠3 x Solent Plus pillows (3.5 ltr/pillow)
⢠5 x Disposal bags and ties (LUT-741-6430D)⢠Maintenance – Absorbs All Fluids – Grey/Black
For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
⢠Oil-Only – Repels Water – White
Hydrophobic absorbent can be used on water. Will float even when oil laden.
⢠Chemical (Universal) – Yellow
For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water.