Archives: Products
Showing 21441–21456 of 23773 results
-
PISTON RING PLIERS 50-100mm CAPACITYAdd to cartKennedy Piston Ring Pliers
To enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.
Capacity: 50 – 100mm (2″ – 4″) -
PIVOT HEAD TOOLHOLDER FOR 3/4″ KNURLSRead moreTwo Knurl Toolholder
Machine ground high grade steel, black mottle finish.
Self-adjusting head. Knurls available separately.
For use with knurl size 3/4″ x 3/8″ x 1/4″. -
PJ996/4R25R ZINC CHLORIDE BATTERY 6VRead moreEdison? PJ996 6V Heavy Duty Lantern Battery
Edison? Zinc Chloride Batteries provide an economical and reliable power source for low to medium drain applications such as lanterns, torches, radios and remote controls etc.
-
PL7M 7PCE 3/4″ SQ DR IMPACT SOCKET SETRead moreKennedy Chrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Standard Length, 6-Point – 7 Piece Set
7 Piece Set – Metric
Standard length: 19, 24, 27, 30, 32, 36 and 46mm.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
PLAIN EDGE FINDER 0.500″BODYRead moreKennedy Edge & Centre Finders – Plain Edge
For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.
-
PLAIN EDGE FINDER 12mm BODYRead moreKennedy Edge & Centre Finders – Plain Edge
For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.
-
PLANER TYPE SURFACE FORMING TOOLRead moreKennedy Surface Forming Tools
With tough enamelled alloy bodies and high carbon heat treated steel blades.
Flat File – Straight Handle
For straight filing with flat blade as standard. Plastic handle.
Blade length: 255mm. Blade width: 40mm. Overall length: 395mm.Plane
For conventional plane type filing. With flat blade as standard. Black plastic handle.
Blade length: 255mm. Blade width: 40mm. Overall length: 285mm.Block Plane
For single handed use, giving compactness and precision filing.
Blade length: 140mm. Blade width: 40mm. Overall length: 140mm.Shaver Tool With plastic holder.
Blade length: 63mm. Blade width: 40mm. Overall length: 185mm.Round File – Straight
For convex and concave surface shaping. Wooden handle.
Blade length: 255mm. Blade width: 16mm. Overall length: 360mm. -
PLANISHING HAMMER CROWNED FACERead moreBumping Hammers
Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft. Manufactured to BS 4114.
Crown Faced
As above but with crowned face. Length: 325mm. -
PLANISHING HAMMER CURVED PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Curved Pein Panel Beater
Medium weight for general use where access is difficult. Length: 325mm. -
PLANISHING HAMMER FLAT FACERead moreBumping Hammers
Highly polished striking heads and cheeks. One square and one round face. The most popular general purpose panel beating hammer. Hickory shaft.
Manufactured to BS 4114.Flat Faced
For straightening thicker gauge metals where a reasonable striking force is needed.
Length: 325mm. -
PLANISHING HAMMER HEAVY SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER LIGHT SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER REVERSE CURVERead moreReverse Curve Finishing Hammer
Highly polished striking heads and cheeks. The high crowned radius faces have a convex surface suitable for work on concave and recessed panels. The short head is ideal for use in confined areas. Hardwood shaft.
Length: 325mm. -
PLANISHING HAMMER ROUND PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Round Pick and Finishing Panel Beater
Medium weight with crowned face designed to remove high spots. Hickory shaft.
Length: 325mm. -
PLANISHING HAMMER STANDARD SHRINKINGRead moreShrinking Hammers
Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.
Sizes: 325mm (except -7300K = 345mm). -
PLANISHING HAMMER STRAIGHT PEIN FINISHING PICKRead moreFinishing Picks
Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.
Straight Pein and Finishing Panel Beater
Medium weight for general use. Length: 325mm.