Archives: Products
Showing 21681–21696 of 23773 results
-
PROFESSIONAL SAFETY HELMET WHITERead moreProfessional Safety Helmets
Lightweight, stable and comfortable fit with less leverage on the head and a lower centre of gravity, making it feel even lighter than it is. Short peak for enhanced visibility.
The new DeFormaTec⢠system reacts ultra quickly to absorb impact energy before it reaches the wearer. The helmet shell is a result of analysis of thousands of helmet crash tests.It is based on the same principle as a rigid yet flexible Formula 1 chassis, reacting on impact by partial deformation to absorb the shock. Fitted with a 4-point adjustable comfort webbing harness and absorbent soft leather sweatband.
Conform to EN 397: 1996. -
PROFESSIONAL SAFETY HELMET YELLOWRead moreProfessional Safety Helmets
Lightweight, stable and comfortable fit with less leverage on the head and a lower centre of gravity, making it feel even lighter than it is. Short peak for enhanced visibility.
The new DeFormaTec⢠system reacts ultra quickly to absorb impact energy before it reaches the wearer. The helmet shell is a result of analysis of thousands of helmet crash tests.It is based on the same principle as a rigid yet flexible Formula 1 chassis, reacting on impact by partial deformation to absorb the shock. Fitted with a 4-point adjustable comfort webbing harness and absorbent soft leather sweatband.
Conform to EN 397: 1996. -
PROFESSIONAL SERVICE TOOLKIT 102-PCERead more102 Piece Service Engineer’s Tool Kit
Contents
⢠Hi-impact mobile tool case.
⢠Six piece 16cm cut 2 needle file set.
⢠150mm chrome finish adjustable wrench.
⢠150mm mains tester range 125/250V.
⢠19mm x 33m insulation tape: black, red and green/yellow pvc.
⢠Soldering iron 25W 240V.
⢠Desoldering gun.
⢠Cable stripping knife.
⢠17g 1.0mm diameter 60/40 cored solder.
⢠Square head centre punch 3.2 x 100mm.
⢠150mm/6″ flexible rustless rule.
⢠Precision tweezers: 115mm sharp nose, 120mm flat blade. ⢠Eye loupe.
⢠30mm dia. telescopic inspection mirror (handle expands to 480mm).
⢠225g (1/2lb) ball pein hammer.
⢠7.5m/25′ steel tape.
⢠13 segment blade mini autolock retractable knife.
⢠Junior hacksaw frame c/w hardened blade.
⢠10 junior hacksaw blades for metal.
⢠215mm plastic handle scissors.
⢠Magnetic pick up tool.
⢠160mm snipe nose pliers.
⢠160mm diagonal cutting nippers.
⢠160mm combination pliers with side cutter.
⢠150mm insulation and wire stripping pliers.
⢠115mm precision flat nose pliers.
⢠115mm precision long nose pliers.
⢠115mm precision nippers.
⢠115mm precision end cutting nippers.
⢠Pro-Torq grip screwdrivers with chrome vanadium blade: slotted 100 x 6mm; crosspoint 76mm x No.0 and No.1, 6mm x No.2; supadriv 76mm x No.0 and No.1, 100mm x No.2; electricians’: parallel 150 and 200 x 5mm.
⢠Offset screwdrivers: 5mm x No.1 and 6mm x No. 2.
⢠1000V VDU insulated screwdrivers: parallel 4 x 100mm; slotted 5.5 x 125mm.
⢠Torx screwdrivers: T6, T8 and T10.
⢠11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm; crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
⢠Seven piece electronic screwdriver set: parallel 1.4, 2, 2.4 and 3mm; crosspoint PHO-3, PHO-2 and PH0.
⢠Six piece chrome vanadium steel 0 – 11 BA open ended spanner set.
⢠20mm diameter sash tool.
⢠Nine piece hex key set 1.5 – 10mm.
⢠Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm. -
PROFESSIONAL THICK BLEACH 5LTRRead moreConcentrated Thick Bleach
Powerful thick formula effective against all pathogenic organisms. Contains added detergents for improved cleaning
-
PROFESSIONAL VARIPITCH HOLESAW KITRp1.804.000Add to cartVariable Pitch Bi-Metal HSS Holesaw Kits
For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring a very aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics produced when sawing materials such as tubing, angle etc. Improved swarf clearance is also achieved requiring less effort to complete each cut. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance. 4 to 6 teeth per inch. 28.5mm (1 1/8â) cutting depth.
Service Engineerâs Kit – 9 Pieces
Comprises of 22, 29, 35, 44, 51 and 64mm variable pitch bi-metal high speed steel holesaws with hardened cutting edges, K7 spring, K4 and K10 arbors with pilot drills.
Supplied in a robust plastic carry case. -
PROFESSIONAL WASHING-UP LIQUID 5LTRRead moreProfessional Washing-up Detergent
A highly concentrated (up to 30%) liquid for hand dishwashing and general cleaning.
-
PRP/01 ROTARY ACTION CHEMICAL PUMPRead moreKennedy Rotary Chemical Dispensing Pump
Designed for use with fluids where a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. Seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants. Threaded polypropylene suction tube and a choice of 2″ bung adaptors for use on both plastic and metal drums of capacities 50ltr and 205ltr. For use with water-based fluids, anti-freeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5ltr per 20 turns of the handle).
DO NOT USE with acetone, lacquer, mineral oils, solvents or turpentine. -
PRSNR 2525M12 EXTERNAL TOOLHOLDERRead moreIndexa Lever Lock External Toolholders – PRSN R
90° approach for negative round inserts.
-
PRUNING GARDEN SET 9-PCERead moreRutland Pruning Set
Contents:
Triangular bow saw – 460mm overall length. Bypass loppers – maximum cutting diameter 60mm. Heavy duty hedge shears. Heavy duty bypass secateurs – maximum cutting diameter 25mm. Folding pruning saw – 200mm blade length. Hand trowel and
weeding fork. Heavy duty polythene garden bag with 170ltr capacity. Heavy duty Canadian rigger gloves size 10. -
PSBNL 2020K12 EXTERNAL TOOLHOLDERRead moreIndexa Lever Lock External Toolholders – PSBN R/L
75° approach for negative square inserts.
-
PSBNR 2020K12 EXTERNAL TOOLHOLDERRead moreIndexa Lever Lock External Toolholders – PSBN R/L
75° approach for negative square inserts.
-
PSBNR 2525M12 EXTERNAL TOOLHOLDERRead more
Indexa Lever Lock External Toolholders – PSBN R/L
75° approach for negative square inserts.
-
PSC016 PROFESSIONAL SERVICE CASERead moreKennedy Professional Service Case
Suitable for transporting and storing smaller items. Manufactured from hi-density industrial strength plastic with opaque lid for viewing contents. Slide clasp-locking mechanism to prevent opening while in transit/storage. Lid and base feature two aligning padlock holes to accept padlocks with shackle diameters up to 5.8mm. The lids have three hinges for strength and durability. Eight fixed compartments supplied with dividers to make up to 16 sections.
Dimensions (W x D x H): 380 x 60 x 335mm. -
PSD39MA 39-PCE 3/8″ SQ DR IMPACT SKT SETRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point – 39 Pieces Set
Impact Socket Set
Standard length: metric 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm.
Standard length: A/F 1/4â, 5/16â, 3/8â, 7/16â, 1/2â, 9/16â, 5/8â, 11/16â and 3/4â.
Deep metric: 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 21mm.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
PSDNN 2020K12 EXTERNAL TOOLHOLDERRead moreIndexa Lever Lock External Toolholders – PSDN N
45° straight approach for negative square inserts.
-
PSDNN 2525M12 EXTERNAL TOOLHOLDERRead more
Indexa Lever Lock External Toolholders – PSDN N
45° straight approach for negative square inserts.