Archives: Products
Showing 21777–21792 of 23773 results
-
R56666″ PALM SANDER SELFVACUUM TYPEAdd to cartKobe⢠Random Orbital Palm Sander Self-Vacuum Type, 150mm
R5666
Suitable for shaping, blending and smoothing of body filler and rapid material removal. Random 5mm diameter orbit for a swirl-free finish – can be used for wet sanding. 150mm diameter Hook & Loop backing pad with a 600A hole pattern. 1.6m extraction hose. Can be connected to a portable dust collection system or supplied cotton bag to help reduce airborne dust and clean-up time. One handed operation with a rubber grip. Rotating air inlet to prevent the air hose tangling.
Backing pad size: ø150mm (6â).
Backing pad type: Hook & Loop.
Orbit diameter: 5mm (3/16â).
Suction type: self-generating vacuum.
Spindle size: 5/16â.
Free speed: 11,000rpm.
Recommended air pressure: 6.2bar/90psi.
Air consumption: 3cfm* (85ltr/min).
Air inlet thread: 1/4â NPT.
Minimum air hose size (ID): 10mm (3/8â).
Motor power: 0.25hp.
Noise Level: 88dBA
Sound Power: 76dBA
Vibration: 5.2m/s
Overall length: 210mm.*Based on a 15 second cycle per minute average use.
-
R7722 1/4″ SPEED RATCHETRead moreKobe⢠Speed Ratchet 1/4â Square Drive
R7722
Suitable for the removal and installation of threaded fasteners. Reversible hardened steel 1/4â square drive. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
Drive size: 1/4â (6mm). Free speed: 200rpm.
Recommended air pressure: 6.2bar/90psi.
Air consumption: 4cfm* (113ltr/min).
Noise Level: 80dBA
Sound Power: 88dBA
Vibration: 1.8m/s2
Working torque range: 7 ~ 27nm (5 ~ 20ft/lbs).
Air inlet thread: 1/4â NPT.
Minimum air hose size (ID): 10mm (3/8â).
Overall length: 200mm.*Based on a 15 second cycle per minute average use.
-
R8 x 1JT DRILL CHUCK ARBORRead moreBridgeport Drive to Jacobs Taper
Bridgeport Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
R8 x 2JT DRILL CHUCK ARBORRead moreBridgeport Drive to Jacobs Taper
Bridgeport Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
R8 x 33JT DRILL CHUCK ARBORRead moreBridgeport Drive to Jacobs Taper
Bridgeport Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
R8 x 3JT DRILL CHUCK ARBORRead moreBridgeport Drive to Jacobs Taper
Bridgeport Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
R8 x 6JT DRILL CHUCK ARBORRead moreBridgeport Drive to Jacobs Taper
Bridgeport Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
R8-BC 1/2″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 1/4″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 10mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 11mm COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 12mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 14mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 16mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 20mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 3/4″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â.