Archives: Products
Showing 21921–21936 of 23773 results
-
RETRACTABLE CARBIDE TIPPED ETCHING PENRead moreKenendy Retractable Carbide Tipped Etching Pen
For marking and scribing in hard and soft materials including steel, plastics and timber.
Overall length: 180mm. -
REVERSIBLE COMBINATION SPANNER SET 9PCRead moreKennedy Professional Reversible Combination Spanner Set – Metric
Set
9 Piece Metric: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm.Bi-hexagonal 15 degree offset rings with a 72 teeth lever ratcheting system that requires only 5 degree movement to operate, making them ideal for use in tight areas. Made from high quality Chrome Vanadium Steel with mirror polish finish to prevent oil and dirt from adhering to the spanner. Heads conform to ASME B107.6.
-
REVERSIBLE STEEL BACK GENTS SAWRead moreKennedy Reversible Gent’s Saw
Suitable for flush cutting in the most awkward corners on the left or right hand side. Reversible offset alloy steel blade cranked and polished with rigid back. Rosewood handle with brass ferrule. 15TPI.
-
REVOLVING CENTRE 1MT STANDARD DUTYRead moreKennedy Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.
Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm. -
REVOLVING CENTRE 2MT STANDARD DUTYAdd to cartKennedy Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.
Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm. -
REVOLVING CENTRE 3MT STANDARD DUTYAdd to cartKennedy Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.
Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm. -
REVOLVING CENTRE 4MT STANDARD DUTYRead moreKennedy Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.
Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm. -
REVOLVING CENTRE 5MT STANDARD DUTYRead moreKennedy Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.
Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm. -
REVOLVING CENTRE POINT 60 DEG.x10mm DIA.Read moreKennedy Interchangeable Points
A complete range of interchangeable points to complement the revolving centre sets.
-
REVOLVING CENTRE POINT 60 DEG.x6mm DIA.Read moreKennedy Interchangeable Points
A complete range of interchangeable points to complement the revolving centre sets.
-
REVOLVING CENTRE POINT 60 DEG.x7.5mm DIARead moreKennedy Interchangeable Points
A complete range of interchangeable points to complement the revolving centre sets.
-
REVOLVING CENTRE POINT 60DEG.x12.7mm DIA.Read moreKennedy Interchangeable Points
A complete range of interchangeable points to complement the revolving centre sets.
-
REVOLVING CENTRE SET 2MTMEDIUM DUTYRead moreKennedy Standard Duty Interchangeable Revolving Centre Sets
Manufactured from high alloy steel, precision ground internally and externally with pre-lubricated Âbearings. A versatile revolving centre with interchangeable points for a wide variety of applications. Ideal for toolroom or manufacture of small turned components. Points fit into body by means of a taper and are removed by use of the drift key supplied. All mating surfaces are precision ground and the set is supplied in a varnished wooden storage box.
-
REVOLVING CENTRE SET 3MTMEDIUM DUTYRead moreKennedy Standard Duty Interchangeable Revolving Centre Sets
Manufactured from high alloy steel, precision ground internally and externally with pre-lubricated Âbearings. A versatile revolving centre with interchangeable points for a wide variety of applications. Ideal for toolroom or manufacture of small turned components. Points fit into body by means of a taper and are removed by use of the drift key supplied. All mating surfaces are precision ground and the set is supplied in a varnished wooden storage box.
-
REVOLVING TOOLHOLDER FOR3/4″ KNURLSRead moreJHL Six Knurl Toolholder
Machine ground high grade steel, black mottle finish. Revolving head. Knurls available separately, to see available knurls click “Featured Catalogue” link below. For use with knurl size 3/4″ x 3/8″ x 1/4″.
-
REVOLVING TOOLHOLDER FOR5/8″ KNURLSRead moreSix Knurl Toolholder
Machine ground high grade steel, black mottle finish.
Revolving head. Knurls available separately.
For use with knurl size 5/8″ x 3/16″ x 1/4″.