Archives: Products

Showing 22273–22288 of 23773 results

  • SCGT 09T308-AL INSERT GRADE K10
    Rp194.000

    Indexable Turning Inserts – SCGT

    Grades:
    K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

    Chip Breaker: AL. Application: Med Cut (Alum).

    Read more
  • SCK035Y CHEMICAL CARRY BAG SPILLKIT 35LTR

    35 ltr Kits in Cube Bag

    Many situations require a permanent supply of absorbents to be on hand. Solent Plus™ spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown.

    Kits contain:
    • 15 x Solent Prime pads (1.0 ltr/pad)
    • 2 x Solent Plus 3.0m sock (10 ltr/sock)
    • 1 x Disposal bag and tie (LUT-741-6430
    • 1 x Instruction sheet

    • Maintenance – Absorbs All Fluids – Grey/Black
    For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water.
    • Oil-Only – Repels Water – White
    Hydrophobic absorbent can be used on water. Will float even when oil laden.
    • Chemical (Universal) – Yellow
    For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water.

    Read more
  • SCLCL 1010E06 EXTERNAL TOOLHOLDER

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCL 1212F09 EXTERNAL TOOLHOLDER
    Rp1.458.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCL 1616H09 EXTERNAL TOOLHOLDER
    Rp1.458.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCL 2020K09 EXTERNAL TOOLHOLDER
    Rp1.637.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCL 2020K12 EXTERNAL TOOLHOLDER

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCL 2525M12 EXTERNAL TOOLHOLDER

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 1010E06 EXTERNAL TOOLHOLDER
    Rp1.458.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 1212F09 EXTERNAL TOOLHOLDER
    Rp1.458.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 1616H09 EXTERNAL TOOLHOLDER
    Rp1.458.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 2020K09 EXTERNAL TOOLHOLDER
    Rp1.637.000

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 2020K12 EXTERNAL TOOLHOLDER

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCLCR 2525M12 EXTERNAL TOOLHOLDER

    Indexa Screw-On External Toolholders – SCLC R/L

    95° approach for 7° positive 80° rhombic inserts.

    Read more
  • SCM1045C SHORT SPOT DRILL/CHAMFER CUTTER
    Rp7.573.000

    Multi-Pro Spot Drills & Chamfer Mills – Uses C22 GUX Inserts

    A spotting drill with all the advantages of indexable inserts – reduced tool maintenance time, increased performance, lower inventory cost and no regrinding requirements. The insert clamping method ensures accurate and secure location with quick change-over times. Multi-pro has a unique geometry which allows cutting over the centre line, using carbide, without chipping of the cutting edge. This versatile tool may be used to ‘spot’ holes prior to drilling, as a means to guide the drill and keep the hole straight, to keep size and accurately position, relative to the datum. NB. The 118° inclusive tool is recommended for ‘spotting’ prior to drilling with 118° point drills. Countersinks may be produced prior to drilling to provide a corner break on a drilled hole, a chamfer conforming to drawing specifications, a lead in for a subsequent tapping operation, or a full countersink to accommodate a screw head. Corner chamfers on edges, contours and bores can be machined as light de-burring operations or full depth chamfers. Multi-pro may be used to produce vee grooves for fluid channels, locations for round components and grip pattern or serrations on jaws and clamp pads.

    Read more
  • SCMT 09T304-PM INSERT GRADE QX520
    Rp223.000

    Indexable Turning Inserts – SCMT

    Grades:
    QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

    Chip Breaker: PM. Application: Medium.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop