Archives: Products
Showing 22305–22320 of 23773 results
-
SCZ024-1G GREEN 1-PLY INTERFOLD TOWELS (3600)Read moreHeavy Duty Hand Towels
High quality 1-ply and 2-ply paper towels. For the most cost efficient and hygienic solution to hand drying. When the towel is pulled out the next towel is presented for use – eliminates problems associated with cross-contamination of towels in medical and food industry applications. Small towel size minimises cost and waste. Can be topped up during use – need never run out.
For use with Solent? CTD201 dispenser: Order code: SOL-952-9050B. -
SCZ024-2W WHITE 2-PLY Z-FOLD TOWELS (3000)Read moreHeavy Duty Hand Towels
High quality 1-ply and 2-ply paper towels. For the most cost efficient and hygienic solution to hand drying. When the towel is pulled out the next towel is presented for use – eliminates problems associated with cross-contamination of towels in medical and food industry applications. Small towel size minimises cost and waste. Can be topped up during use – need never run out.
For use with Solent? CTD201 dispenser: Order code: SOL-952-9050B. -
SCZ025-1B BLUE 1-PLY INTERFOLD TOWELS (3600)Read moreHeavy Duty Hand Towels
High quality 1-ply and 2-ply paper towels. For the most cost efficient and hygienic solution to hand drying. When the towel is pulled out the next towel is presented for use – eliminates problems associated with cross-contamination of towels in medical and food industry applications. Small towel size minimises cost and waste. Can be topped up during use – need never run out.
For use with Solent? CTD201 dispenser: Order code: SOL-952-9050B. -
SD1-500B DRY MOLY SPRAY 500mlRead moreSolent? Dry Moly EP Lubricant
The molybdenum disulphide lubricant particles are one micron or less in size allowing the product to adhere in the smallest surface irregularities. Fast drying at room temperature, the dry coating can be polished if required, to a high shine providing micro coating of lubricant for slides, bearings, chutes and conveyors. The dry film is resistant to pick up and resists the accumulation of debris. Ideal for fastener lubrication where it will prevent galling, particularly on stainless steel. Effective on foundry equipment where high temperatures up to 450C are common. Also suitable for open gear lubrication and any location where a wet coating is not acceptable or would burn off. Provides lubrication at extremely high load rates up to 100,000 psi. Suitable for all steels, copper, and brass components. No silicone content. Packed in a 500ml aerosol for economy in use.
-
SD2 2mm SOLID CARBIDE SCREW DRILLRp254.000Read moreSolid Carbide Screw Drills
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
-
SD23456 2-6mm SCREW DRILLS (SET-5)Rp2.051.000Read moreSolid Carbide Screw Drill Set Set
Solid Carbide Screw Drill Set
Contents: SD2, SD3, SD4, SD5 and SD6 -
SD3 3mm SOLID CARBIDE SCREW DRILLRp296.000Read more
Solid Carbide Screw Drills
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
-
SD4 4mm SOLID CARBIDE SCREW DRILLRp415.000Read more
Solid Carbide Screw Drills
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
-
SD5 5mm SOLID CARBIDE SCREW DRILLRp544.000Read more
Solid Carbide Screw Drills
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
-
SD6 6mm SOLID CARBIDE SCREW DRILLRp726.000Read more
Solid Carbide Screw Drills
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
-
SD60MAB 1/4″ SQ. DR. SOCKET SETRead moreSenator Socket Sets 1/4″ – SD60MAB – 60 Piece Metric, Inch & BA
Sockets: Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm.
AF: 3/16â, 7/32, 1/4â, 9/32â, 5/16â, 11/32â, 3/8â, 7/16â and 1/2â AF.
BA: 0, 2, 4, 6, 8 and 10BA.
Screwdriver Bits: Slotted 3.5, 4.5, 5.5, 6mm.
Crosspoint No.1, No.2 No.3. PZ No.1, No.2, No.3.
TX: T15, T20 and T25.
Hex 3, 4, 5, 6, 8 and 10mm. 1/8â, 5/32â, 3/16â, 7/32â, 1/4â, 5/16â, 3/8â AF.
Accessories: ratchet handle, sliding T-handle, spinner handle, universal joint. 50, 75 and 150mm extension bars. -
SDA100MAB 1/4″ & 3/8″ SQ. DR. SOCKET SETRead moreSenator Socket Sets 1/4″, 3/8″ – SDA100MAB – 100 Piece Metric, Inch & BA
1/4â Drive Bi-Hex Sockets:
Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm.
AF: 3/16â, 7/32â, 1/4â, 9/32â, 5/16â, 11/32â, 3/8â, 7/16â, 1/2â AF.
BA: 0, 2, 4, 6, 8 and 10BA.
Screwdriver Bits:
Slotted 3.5, 4.5, 5.5, 6mm.
Crosspoint: No.1, No.2, No.3.
PZ: No.1, No.2, No.3.
TX: T15, T20, T25.
Hex: 3, 4, 5, 6, 8, 10mm; 1/8â, 5/32â, 3/16â, 7/32â, 1/4â, 5/16â, 3/8â AF.
Accessories: 50, 75 and 150mm extension bars, ratchet handle, sliding T-handle, spinner handle, universal joint.3/8â Drive Bi-Hex Sockets:
Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19 and 21mm.
1/4â, 5/16â, 3/8â, 7/16â, 1/2â, 9/16â, 5/8â, 11/16â and 3/4â AF.
Deep Sockets: 10, 11, 12, 13 and 14mm; 9/16â, 5/8â, 11/16â and 3/4â AF.
Spark Plug Sockets: M10 (16mm) and M14 (21mm).
Accessories: 75 and 150mm extension bars, flexible handle, ratchet handle, universal joint, sliding T-handle -
SDC464P 46x46cm POLYURETHANE DRAIN COVER (ORANGE)Read morePolyurethane Drain Covers
Your first line of defence against environmental contamination. Re-usable polyurethane or single use clay covers which are extremely malleable for use on uneven surfaces.
⢠Constructed from dual hardness laminated polyurethane with no fillers. High tack surface creates a tough, durable seal
⢠Low weight, easy to handle and can be used quickly for emergency spills
⢠Designed to be re-used – can be cleaned using soap and water and re-stored using the film cover
⢠Chemically resistant – can be used with a wide range of oils, fuels, solvents and other chemicals
⢠Environmentally safe
⢠Storage holdalls are also available separately, see below -
SDC614 65x45cm MOULDABLECLAY BASED DRAIN COVER(2)Read moreSingle-Use Clay Drain Covers
Your first line of defence against environmental contamination. Re-usable polyurethane or single use clay covers which are extremely malleable for use on uneven surfaces.
⢠Made from chemically inert clay, that will not react to or with any chemical
⢠Extremely malleable for use on an uneven surface – will mould itself to the ground
⢠Hessian netting runs through the product to afford maximum strength – Supplied poly wrapped to enhance the storage life
⢠Can be carried on vehicles as part of an ADR kit
⢠For single-use only
⢠Pack of 2 -
SDC616C 61x61cm POLYURETHANE DRAIN COVER (CLEAR)Read moreTranslucent Drain Covers
Your first line of defence against environmental contamination. Re-usable polyurethane or single use clay covers which are extremely malleable for use on uneven surfaces.
⢠Translucent polymer construction enables site managers and safety officers to quickly confirm that waste water systems are free of oils, chemicals and other spilt contaminants
⢠Re-usable – designed for multiple applications
⢠With lapped reinforced edges -
SDC616P 61x61cm POLYURETHANE DRAIN COVER (ORANGE)Read morePolyurethane Drain Covers
Your first line of defence against environmental contamination. Re-usable polyurethane or single use clay covers which are extremely malleable for use on uneven surfaces.
⢠Constructed from dual hardness laminated polyurethane with no fillers. High tack surface creates a tough, durable seal
⢠Low weight, easy to handle and can be used quickly for emergency spills
⢠Designed to be re-used – can be cleaned using soap and water and re-stored using the film cover
⢠Chemically resistant – can be used with a wide range of oils, fuels, solvents and other chemicals
⢠Environmentally safe
⢠Storage holdalls are also available separately, see below