Archives: Products
Showing 22417–22432 of 23773 results
-
SET OF 32 HSS DRILLS 1-10.50mm x 0.5mmRead moreSherwood HSS Ground Flute Jobber Drill Set, Metric – 32 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. With precision-ground flutes and black finish (W-finish), this is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Jobber Drill Set – 32 Pieces
Industrial quality. Ground flute, blue finish. Supplied in indexing metal cases.
Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS328 : Part 1 DIN 338N & ANSI B94 – 11M.
Set contains (includes Tapping sizes 1.9 to 10.2): 1.0, 1.5, 1.9, 2.0, 2.1, 2.5, 2.6, 2.9, 3.0, 3.2, 3.3, 3.5, 3.8, 4.0, 4.2, 4.5, 5.0, 5.1, 5.5, 6.0, 6.5, 6.8, 7.0, 7.5, 7.9, 8.0, 8.5, 9.0, 9.5, 10.0, 10.2 and 10.5mm. -
SET OF 41 HSS DRILLS 6-10.00mm x 0.1mmRp2.364.000Add to cartSherwood HSS Ground Flute Jobber Drill Set, Metric – 41 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. With precision-ground flutes and black finish (W-finish), this is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Jobber Drill Set 41 Pieces
Industrial quality. Ground flute, blue finish. Supplied in indexing metal cases.
Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS328 : Part 1 DIN 338N & ANSI B94 – 11M.
Set contains: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0mm. -
SET OF 5 HSS 1/2″ SHANK DRILLSRead moreHSS Reduced Shank Drill Set (Blacksmiths)
5 Piece Set Contents:
14, 16, 18, 20 and 22mm. -
SET OF 51 HSS DRILLS 1-6.00mm x 0.1mmRp838.000Read moreSherwood HSS Ground Flute Jobber Drill Set, Metric – 51 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. With precision-ground flutes and black finish (W-finish), this is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Jobber Drill Set – 51 Pieces
Industrial quality. Ground flute, blue finish. Supplied in indexing metal cases.
Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS328 : Part 1 DIN 338N & ANSI B94 – 11M.
Set contains: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0, 3.1, 3.2, 3.3, 3.4, 3.5. 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 5.0, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9 and 6.0mm. -
SET OF 6 HSS EXTRA LENGTH DRILLS 3-10.00mmRp1.129.000Read moreHSS Extra Length Drill Set
Used for deep hole drilling in most materials. (Not suitable for the drilling of holes in crankshafts.)
Manufactured to BS 328 : Part 1 : 1986. -
SET OF 60 HSS DRILLS No.1-60 GAUGERp781.000Read moreSherwood HSS Ground Flute Jobber Drill Set, Gauge – 60 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. With precision-ground flutes and black finish (W-finish), this is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Jobber Drill Set – 60 Pieces
Industrial quality. Ground flute, blue finish. Supplied in indexing metal cases.
Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS328 : Part 1 DIN 338N & ANSI B94 – 11M.
Set contains: Gauge 1-60. -
SET OF 7 HSS DRILLS 1/16-1/4″ x 1/32″Read moreSherwood HSS Ground Flute Jobber Drill Set, Inch – 7 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. With precision-ground flutes and black finish (W-finish), this is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Jobber Drill Set – 7 Pieces
Industrial quality. Ground flute, blue finish. Supplied in indexing metal cases.
Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS328 : Part 1 DIN 338N & ANSI B94 – 11M.
Set contains: 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″ and 1/4″. -
SET OF BEAVER/12″ ADJUSTABLE HACKSAW FRAMESRead moreKennedy 2-Piece Hacksaw Set
Beaver style 150mm (6รขยย) junior hacksaw and 250/300mm (10รขยย/12รขยย) adjustable hacksaw with wing nut tensioner.
-
SET-A 15CM CUT 2 RIFFLER FILE SET 12PCRp3.972.000Read moreRiffler File Set
Swiss Pattern
The 15cm are used by diemakers, jewellers, silversmiths, engravers etc. All are double ended with the same cut both ends.Set A
15cm – Cut 2
Contents (1 of each): 900, 911, 914, 916, 918, 940, 952, 957, 981, 983, 985 and 987. -
SET-B 15CM CUT 2 RIFFLER FILE SET 12PCRp5.312.000Read moreRiffler File Set
Swiss Pattern
The 15cm are used by diemakers, jewellers, silversmiths, engravers etc. All are double ended with the same cut both ends.Set B 15cm – Cut 2
Contents (1 of each): 905, 913, 915, 917, 931, 943, 955, 963, 982, 984, 986 and 996. -
SETTING-IN STICK 330mmRead moreSheet Metal Working Tools
Setting-in Sticks
For similar work as bending sticks, with a more acute curve. Designed for flashing work. -
SEVEN PATTERN SPRAY GUNRead moreSpray Gun
This seven pattern spray gun has a comfort grip, locking trigger and snap action connector.
Spray settings:
รขยยข Soaker.
รขยยข Shower.
รขยยข Circle.
รขยยข Jet.
รขยยข Flat.
รขยยข Mist.
รขยยข Cone. -
SF1-500B FLAW DETECTOR CLEANER SPRAY 500mlRead moreFlaw Detector Cleaner Spray
SF1-500B
Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.
Size: 500ml -
SF2-500B FLAW DETECTOR DYE PENETRANT SPRAY 500mlRead moreSolent Flaw Detector Inspection System
Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.
-
SF20L 640mm DIA DRUM FUNNEL & LID FOR 205LTRRead moreDrum Funnel & Tray
Drum Funnel
รขยยข An essential item when filling either a drum or IBC, particularly with waste fluids
รขยยข Designed to ensure that there are no spills with an integral lid so that the funnel can be left in place when not in use
รขยยข Fits over the top of a 205ltr drum
รขยยข Corrosion resistant 100% polyethylene constructionDrum Tray
รขยยข Where there is only one drum in use in an area, the Oil Storage Regulations state that a drum tray with a capacity that is 25% of the size of the drum is sufficient – This circular tray meets the requirement
รขยยข Ideal as a temporary bund for smaller items during maintenance operations, including batteries
รขยยข Corrosion resistant 100% polyethylene construction -
SF3-500B FLAW DETECTOR DEVELOPER SPRAY 500mlRead moreFlaw Detector Developer
SF3-500B
White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.