Archives: Products
Showing 22689–22704 of 23773 results
-
SOT-8 CIRCULAR DRUM PALLETRead moreDrum Funnel & Tray
Drum Funnel
⢠An essential item when filling either a drum or IBC, particularly with waste fluids
⢠Designed to ensure that there are no spills with an integral lid so that the funnel can be left in place when not in use
⢠Fits over the top of a 205ltr drum
⢠Corrosion resistant 100% polyethylene constructionDrum Tray
⢠Where there is only one drum in use in an area, the Oil Storage Regulations state that a drum tray with a capacity that is 25% of the size of the drum is sufficient – This circular tray meets the requirement
⢠Ideal as a temporary bund for smaller items during maintenance operations, including batteries
⢠Corrosion resistant 100% polyethylene construction -
SP1-500B ANTI-RUST PROTECTION SPRAY GREEN 500mlRead moreAnti Rust Protection Spray – For Tools and Packing
Solent Green Moisture Guard is a soft thin film moisture/ corrosion protective coating. Packed in a large 500ml aerosol. The coating has a slight green colouring which clearly indicates treated areas. Ideal for longer terms moisture/corrosion protection of machined components/moulding dies and tools. Removed easily with Solent Industrial Cleaner, part number SC1-500B.
-
SP100 1/2″x 6″ 1.00 CARATDIAMOND TOOLRead moreKennedy Diamond Point Wheel Dressing Tools – Single-Point Tools
Single-Point Tools
For general use. The diamond point can be reset when it âflatsâ, giving extended tool life (resetting prices available on request). 1/2â x 6â holder size. -
SP1000 GRANITE STRAIGHT EDGERead moreOxford Granite Straight Edges
Granite Straight Edges
Used for checking surfaces for straightness, drawing and scribing straight lines. Made to BS5204 : Grade A. Supplied with calibration certificate.Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.
-
SP150 1/2″x 6″ 1.50 CARATDIAMOND TOOLRead moreKennedy Diamond Point Wheel Dressing Tools – Single-Point Tools
Single-Point Tools
For general use. The diamond point can be reset when it âflatsâ, giving extended tool life (resetting prices available on request). 1/2â x 6â holder size. -
SP1825K AIR PISTOL SCREWDRIVER KITAdd to cartKobe⢠Pistol Screwdriver Kit
SP1825K
1/4â NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4cfm* air consumption, 45 – 115lbs/inch. 1/4â hex drive capacity. Overall length: 178mm.
Noise Level: 86dBA. Sound Power: 102dBA. Vibration: 4.6m/s.Contents:
SP1825 screwdriver.
Hexagon wrench and spanner.
No.1, 2 and 3 x 50mm crosspoint bits.
4, 5 and 6mm x 50mm slotted bits.
No.2 x 100mm crosspoint double-ended bit.*Based on a 15 second cycle per minute average use.
-
SP2-500B H/D ANTI-RUST PROTECTION SPRAY 500mlRead moreHeavy Duty Anti-rust protection spray
Solent Heavy Duty Anti-Rust Protection Spray is supplied in a large 500ml aerosol. It is a high performance corrosion inhibitor. The product is sprayed directly onto the surface to be protected. Clear in colour with a faint yellow trace to identify treated surfaces. The film has self healing properties and is easily removed with solvent cleaners. The coating will resist moisture, acid and alkali fumes. The film does not contain Silicone or Halogens. Corrosion protection periods vary with environmental conditions. Typical interior protection in the UK in excess of 2 years. Product can be re-applied should conditions require it.
-
SP200 1/2″x 6″ 2.00 CARATDIAMOND TOOLRead moreKennedy Diamond Point Wheel Dressing Tools – Single-Point Tools
Single-Point Tools
For general use. The diamond point can be reset when it âflatsâ, giving extended tool life (resetting prices available on request). 1/2â x 6â holder size. -
SP50 1/2″x 6″ 0.50 CARAT DIAMOND TOOLRead moreKennedy Diamond Point Wheel Dressing Tools – Single-Point Tools
Single-Point Tools
For general use. The diamond point can be reset when it âflatsâ, giving extended tool life (resetting prices available on request). 1/2â x 6â holder size. -
SP630 GRANITE STRAIGHT EDGERead moreOxford Granite Straight Edges
Granite Straight Edges
Used for checking surfaces for straightness, drawing and scribing straight lines. Made to BS5204 : Grade A. Supplied with calibration certificate.Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.
-
SP75 1/2″x 6″ 0.75 CARAT DIAMOND TOOLRead moreKennedy Diamond Point Wheel Dressing Tools – Single-Point Tools
Single-Point Tools
For general use. The diamond point can be reset when it âflatsâ, giving extended tool life (resetting prices available on request). 1/2â x 6â holder size. -
SPACER 3mm INTERCHANGEABLE STAMPRead moreKennedy Individual Nickel-Plated Carbon Steel Founts
Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.
-
SPANNER No.10 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Spanner
Spanner
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
SPANNER No.12 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Spanner
Spanner
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
SPANNER No.4 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Spanner
Spanner
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
SPANNER No.6 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Spanner
Spanner
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.