Archives: Products
Showing 22833–22848 of 23773 results
-
SRDCN 2020K06 EXTERNAL TOOLHOLDERRead moreIndexa Screw-On External Toolholders – SRDC N
90° approach for positive round inserts.
-
SRDCN 2020K08 EXTERNAL TOOLHOLDERRead moreIndexa Screw-On External Toolholders – SRDC N
90° approach for positive round inserts.
-
SRDCN 2525M06 EXTERNAL TOOLHOLDERRead moreIndexa Screw-On External Toolholders – SRDC N
90° approach for positive round inserts.
-
SRDCN 2525M08 EXTERNAL TOOLHOLDERRead moreIndexa Screw-On External Toolholders – SRDC N
90° approach for positive round inserts.
-
SS1525K 1/4″ STRAIGHT AIR SCREWDRIVER KITAdd to cartKobe⢠Straight Screwdriver Kit
SS1525K
1/4″ NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4cfm* air consumption, 10 – 30lbs/inch torque. 1/4″ hex drive capacity.
Noise Level: 90dBA.
Sound Power: 104dBA.
Vibration: 3.2m/s.
Overall length: 210mm.Contents:
SS1525 screwdriver.
Two clutch springs:
Clutch Spring No.06-703-13 Dia 2.3mm; 1Nm – 3Nm
Clutch Spring No.06-703-23 Dia 1.8mm; 0.3Nm – 0.7Nm
2x spanners.
Clutch adjusting wrench.
1/4 NPT nipple.
Mini oil bottle.
No.1 x 65mm crosspoint double ended bit.
5 x 50mm slotted bit.*Based on a 15 second cycle per minute average use.
-
SS20-SL10-030 FLATTED SHANK ADAPTORRead moreIndexa Shank Adaptors – Weldon Shank
Weldon Shank Adaptors
Allows existing weldon shank side lock arbors to hold smaller shank cutters. -
SS32-ER32-098 ER STYLE COLLET CHUCKRp3.273.000Read moreIndexa ER – Collet Chucks – Straight Shank
Straight Shank
The Indexa ER Collet chuck is manufactured as part of Europe’s most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403) -
SS3650 ANGLED SPOTTING SCOPE 18-36x MAGNIFICATIONRead moreRutland Spotting Scope 18-36 x 50
SS3650
High quality precision lenses. Dust caps for ocular and objective lenses. Rubber armoured body protection. Complete with tripod and mounting point. Includes case with shoulder strap, and cleaning cloth. Bag has integral divider which separates the scope from the tripod to eliminate undue wear and tear.Prism type: Porro.
Magnification: 18 – 36x.
Objective lens: 50mm.
Angle of view: 26 – 43°.
Field of view at 1000m: 23 – 38m.
Exit pupil: 1.5 – 4mm.
Focusing method: Manual.
Dimensions (W x H x D): 380 x 360 x 330mm.
Weight: 1190g. -
SS40-ER32-118 ER STYLE COLLET CHUCKRp3.434.000Read moreIndexa ER – Collet Chucks – Straight Shank
Straight Shank
The Indexa ER Collet chuck is manufactured as part of Europe’s most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403) -
SSC-20000 SURFACE CLEAN 20LTRRead moreConcentrated Hard Surface Cleaner/Degreaser
Can be diluted with up to 50 parts of hot or cold water. Rapidly breaks down grease and fat. Apply by hand scrubbing, mopping, power wash systems or mechanical floor scrubbing machines. Can be used on concrete floors, walls, paintwork, components etc.
-
SSC-5000 SURFACE CLEAN 5LTRRead moreConcentrated Hard Surface Cleaner/Degreaser
Can be diluted with up to 50 parts of hot or cold water. Rapidly breaks down grease and fat. Apply by hand scrubbing, mopping, power wash systems or mechanical floor scrubbing machines. Can be used on concrete floors, walls, paintwork, components etc.
-
SSDCN 1212F09 EXTERNAL TOOLHOLDERRp1.458.000Read moreIndexa Screw-On External Toolholders – SSDC N
45° approach for 7° positive square inserts.
-
SSDCN 1616H09 EXTERNAL TOOLHOLDERRp1.458.000Read moreIndexa Screw-On External Toolholders – SSDC N
45° approach for 7° positive square inserts.
-
SSDCN 2020K12 EXTERNAL TOOLHOLDERRead moreIndexa Screw-On External Toolholders – SSDC N
45° approach for 7° positive square inserts.
-
SSDRM104 FFP1 PARTICULATE RESPIRATOR (PK-20)Read moreParticulate Respirator Mask
SSDRM104
Conforms to EN149 2001 FFP1 standards. AS/NZS 1716:2003. With polypropylene (PP) outer layers provides smooth lining and avoids loose fibres, fringe seal avoids open layer around the edges, latex-free synthetic rubber head strap, contour design ensures the compatibility of glasses/goggles and reduces fogging, soft close-cell nose foam and adjustable nosepiece ensures custom shape and increases wearer’s comfort and acceptance. For protection against low-to-average toxicity harmful solid, liquid and smoke -
SSDRM212 FFP2 PARTICULATE RESPIRATOR (PK-20)Read moreParticulate Respirator Mask
SSDRM212
Conforms to EN149 2001 FFP2 and AS/NZS 1716:2003 standards. With polypropylene (PP) outer layers provides smooth lining and avoids loose fibres, fringe seal avoids open layer around the edges. Latex-free synthetic rubber head strap, contour design ensures the compatibility of glasses/goggles and reduces fogging, soft close-cell nose foam and adjustable nosepiece ensures custom shape and increases wearer’s comfort and acceptance. For protection against low-to-average toxicity, harmful solid, liquid and smoke containing the following materials in concentrations up to 12 x NPF or 10 x APF, such as calcium carbonate, china clay, cement, cellulose, sulphur, cotton, flour, ferrous metals, vegetable oils, hardwood, glass fibres, plastic, carbon, mineral oils, quartz, aluminium, bacteria, fungi and mycobacterium tuberculosis (TB). Supplied in packs of 20.