Archives: Products

Showing 23313–23328 of 23773 results

THE REF FLIPCHARTS 4TH EDITION WIRO

Engineers Reference Data Charts

Now with 38 pages of engineering data. Each page coated with an gloss lamination to protect against the dirt and grease encountered in workshop conditions.

Contents:
â¢ Basic forms of heat treatment
Colour charts for tempering and for hardening & forging.
â¢ Material groups
Colour coded machineability chart and hardness listing.
â¢ Tensile strength and hardness
Shore hardness and equivalent tensile strengths and conversions included.
â¢ Lubricant selection
Colour coded materials chart and dilution guidelines.
â¢ Hole and shaft tolerances
H7-e8 tolerances for counterbores included.
â¢ Metric screw and hole sizes
â¢ Thread notation
Explains terminology used to define thread characteristics.
â¢ Standard thread forms;
Sequenced logically, tapping and clearance sizes integrated into single chart and colour highlighted for quick reference. Includes special metric pitches & NPT, distinctions made between ‘Rp’ and ‘G’ series BSP. ISO 529 pitch form diagrams shown. Now also lists tapping and clearance drill sizes for fluteless tap.
â¢ Dimensions of common shank types
Now includes screwed shank, Weldon, DIN Taper, BT Taper, ISO Taper in addition to Morse taper shank details.
â¢ Standards for engineering drawings
Comprehensive listing including contemporary listings and illustrations.
â¢ Abbreviations used in engineering drawings
â¢ Common CNC codes
Comprehensive listing including contemporary listings.
â¢ Axis nomenclature for machine tools
Newly added page explaining the use of letter addresses to define directional motion.
â¢ Trigonometry formulae
Colour coded CAD produced illustrations for quick reference.
â¢ Sines and Cosines
Calculated to six decimal places with colour coded axes for quick reference.
â¢ Tangents and Cotangents
Calculated to six decimal places with colour coded axes for quick reference.
â¢ Co-ordinates for equally pitched holes
Clear and easy to read CAD produced diagrams.
â¢ Bending allowances for malleable materials
Listed as metric radius and thickness with nearest equivalent SWG given for guidance. Clear and easy to read CAD produced diagrams.
â¢ Cutting speed calculator
Gives required RPM for known cutter diameters and cutting speeds.
â¢ Standard drill size conversions;
No & letter sizes integrated into a single chart, standard sizes are highlighted in bold text, size range extended from 25.25mm up to 32.50mm. All inch-fractional sizes converted to mm equivalent as well as inch-decimal and Morse Taper shank sizes are indicated against drill diameter ranges.
â¢ Abbreviations and formulaes
Definitions of standard meanings with specific attention given to turning, milling and drilling.
Comprehensive list of commonly used abbreviations.
â¢ Weight and measure systems, useful conversions and constants
A comprehensive listing of contemporary and old systems, along with the necessary conversion formulae.

Read more
THICK BLEACH 1LTR

Concentrated Thick Bleach

Powerful thick formula effective against all pathogenic organisms. Contains added detergents for improved cleaning

Read more
THREAD NUT RIVETING ATTACHMENT

Kobe Rivet Nut Attachment

This attachment has been specifically designed to insert rivet nuts into sheet metal. Rapid loading of inserts improves productivity. 1/4” Hex. drive makes it suitable for use with cordless, electric or air screwdrivers. Robust moulded polycarbonate body with fluted sides for extra grip. 26mm hexagonal moulding for gripping with a suitable wrench. Complete with a set of three threaded mandels, M4, M5 & M6.

Read more
THROUGH FLOW 20M AIR HOSE

Through Flow Air Hose

Open drum 20m air hose reel. Easy wind reel mechanism. With high impact resistant drum and guide walls. Â½â air hose fitted with two ear hose clips and standard PCL couplings for Â½â hose. 15bar working pressure. The axial supply allows the hose to be wound and unwound during operation. Supplied complete with 1.5m supply connection hose and wall mounting hooks.

Read more
TIGER SMOKE GOGGLES VENTED CLEAR/ANTI-FOG LENS

Safety goggles

Medium energy impact protection at extreme environmental temperatures. Anti-scratch coating for a longer lens life. UV protection. Replaceable, clear and flexible 2mm thick polycarbonate lens. Anti-mist treatment on both sides of the lens. Class 1 optical quality for distortion free continuous use. Resistance to molten metals and hot solids. Built-in brow and cheek protection. Foam surround for improved comfort and adherence. Soft anatomically shaped PVC frame adapts to all faces. Indirect ventilation system. Raised nose bridge for extra lens protection when placed face down. Large peripheral viewing area. Wide anallergenic elasticated headband. Replacement clear polycarbonate lens KEN-960- 8100K. Replacement clear acetate lens KEN-960- 8110K.

Read more
TILE CUTTER/SCORER

Tile Cutter/Scorer

Solid plastic handle with double-edged tungsten, extra hard, carbide cutting tip.

Read more
TILE CUTTING PLIERS

Tile Cutting Pliers

Tungsten carbide cutting wheel. The self-adjusting top jaw ensures a clean break. Suitable for use on ceramic tiles or glass.

Read more
TILE SAW WITH BLADE

Kennedy Tile Saw

Abrasive coated blade suitable for cutting intricate shapes, to allow flush fitting of tiles. Supplied with one blade.

Read more
TK10 M10-12mm T-SLOT CLAMPING KIT (58-PC)

Indexa T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.

Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Read more
TK14 M14-16mm T-SLOT CLAMPING KIT (58-PC)

Indexa T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.

Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Read more
TK16 M16-18mm T-SLOT CLAMPING KIT (58-PC)

Indexa T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.

Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Read more
TK18 M18-20mm T-SLOT CLAMPING KIT (58-PC)

Indexa T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel. Heat treated to HRC 28 – 32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.

Contents:
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long.
Step Blocks (4 off each): 28, 35 and 98mm high.
Step Clamps (2 off each): 64, 100 and 150mm long.
Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Read more
TNMG 160404-NM5 INSERT GRADE QX520

Indexable Turning Inserts – TNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF2. Application: Finish.
Chip Breaker: NF3. Application: Finish.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
TNMG 160404-NM6 INSERT GRADE QX5030
Rp171.000

Indexable Turning Inserts – TNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF2. Application: Finish.
Chip Breaker: NF3. Application: Finish.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
TNMG 160404-NM7 INSERT GRADE QX520

Indexable Turning Inserts – TNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF2. Application: Finish.
Chip Breaker: NF3. Application: Finish.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
TNMG 160408-NF3 INSERT GRADE QX520

Indexable Turning Inserts – TNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC +
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF2. Application: Finish.
Chip Breaker: NF3. Application: Finish.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more