Archives: Products
Showing 23377–23392 of 23773 results
-
TPMR 160308-PG INSERT GRADE QX520Rp199.000Read moreIndexable Turning Inserts – TPMR
Grade:
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated.An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.Chip Breaker: PG. Application: Med/Cut.
-
TPW25 PRODUCTION SLIPPER TORQUE WRENCHRead moreKennedy Production Slipper Torque Wrenches
Wrench âslipsâ when predetermined torque setting is reached, completely eliminating overtightening. Fitted with Mechanical Torque Adjustment Locking Device. Accurate repeatability guarantees equal tightness every time. Incorporates a specially designed multi-lobed cam which automatically resets the wrench after a small movement of the handle, allowing quick progress to the next operation. Incorporates a fully supported ratchet giving smooth, positive torque control, even in confined spaces. Lightweight for less operator fatigue. Manufactured to ISO 6789 : 2003. (Repeatability at +/- 4% of reading).
-
TRADESMAN HOLESAW KIT IN PLASTIC TUBERp564.000Read moreTradesmanâs Compact Kits
For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring a very aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics produced when sawing materials such as tubing, angle etc. Improved swarf clearance is also achieved requiring less effort to complete each cut. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance. 4 to 6 teeth per inch. 28.5mm (1 1/8â) cutting depth.
Tradesmanâs Compact Kits
High quality variable pitch bi-metal high speed steel holesaws with hardened cutting edges. Supplied in a handy storage tube. Ideal size to fit into power tool cases and tool boxes.5 Piece: Comprises of 16, 20, 25 and 30mm holesaws with K1 arbor. 11 Piece: Comprises of 16, 19, 20, 22, 25, 30, 32, 38 and 51mm holesaws with K1 and K10 arbors. -
TRADITIONAL TAP WRENCH & DIE STOCK SET 5-PCERead moreKennedy Tap Wrench & Diestock Set
Contents
Diestocks: 1â x 13/16â,1â x 1â, 1â x 15/16â.
Tap wrenches (square size): 1 x 2.8 – 5.0mm and 1 x 4.0 – 10.0mm. -
TRANSLUCENT PALE AMBER HOT DIP (SINGLE BAR)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
TRANSLUCENT RED HOT DIP (CASE-50)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
TRANSLUCENT RED HOT DIP (SINGLE BAR)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
TRANSLUSCENT PALE AMBER HOT DIP (CASE-50)Read moreProtective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).
-
TRENCH FORKRead moreFork
FSC210
Type: all metal.
Handle type: MYD metal framed.
Shaft: metal.
Blade material: carbon steel, epoxy coated.
Blade: (W)210mm x (H)325mm.
Overall length: 1040mm.
Weight: 1.80kg -
TRENCHING SHOVELRead moreTaper Mouth Shovel, Fork & Round Shovel
STC190
High tensile tubular steel construction with metal ‘MYD’ handle which is designed for heavy industrial and professional use. Finished in a tough epoxy powder coating which prevents rusting and reduces soil adhesion.Type: all metal.
Handle type: MYD metal framed.
Shaft: metal.
Blade material: carbon steel, epoxy coated.
Blade width: 190 – 165mm.
Blade height: 280mm.
Overall length: 990mm. -
TRI-LINE DRIVER SET 6-PCERead moreYamoto Tri-LineTM Screwdriver Sets – 6 Pieces
Ergonomically designed handles which are dual material and three-sided for improved torque and reduced fatigue. Chrome vanadium steel blades with magnetic tips and a hanging hole in handle.
6-Piece Set Contents (mm):
Crosspoint: No. 1 x 75, No. 2 x 100.
Parallel: 3 x 75, 5 x 150.
Flared: 6 x 150, 8 x 200. -
TRI-LINE DRIVER SET 8-PCERead moreTri-LineTM Screwdriver Sets – 8-Pieces
Ergonomically designed handles which are dual material and three-sided for improved torque and reduced fatigue. Chrome vanadium steel blades with magnetic tips and a hanging hole in handle.
8-Piece Set Contents (mm):
Crosspoint: No. 1 x 75, No. 2 x 100.
Parallel: 3 x 75, 5 x 150.
Flared: 6 x 150, 8 x 200, 6 x stubby.
PZ: No.2 x 100. -
TRI-TORQ 1/2″ SQ. DR. TORQUE WRENCH 40-200NmRead moreAjustable Torque Wrench
Manufactured from high quality satin finish steel with a polished steel head. Supplied with a fully traceable calibration certificate and robust storage case. 1/2″ square drive. A unique triangular design linear torque wrench. The desired torque value can be set, and is displayed in the torque windows on the handle. The classic ‘click sound’ notifies the user when pre-set torque has been reached. Manufactured to BS EN 26789 : 1994 and Federal GGG-W-686 standards.
-
TRI-TORQ 1/2″ SQ. DR. TORQUE WRENCH 60-320NmRead moreAjustable Torque Wrench
Manufactured from high quality satin finish steel with a polished steel head. Supplied with a fully traceable calibration certificate and robust storage case. 1/2″ square drive. A unique triangular design linear torque wrench. The desired torque value can be set, and is displayed in the torque windows on the handle. The classic ‘click sound’ notifies the user when pre-set torque has been reached. Manufactured to BS EN 26789 : 1994 and Federal GGG-W-686 standards.
-
TRI-TORQ 3/8″ SQ. DR. TORQUE WRENCH 20-100NmRead moreAjustable Torque Wrench
Manufactured from high quality satin finish steel with a polished steel head. Supplied with a fully traceable calibration certificate and robust storage case. 1/2″ square drive. A unique triangular design linear torque wrench. The desired torque value can be set, and is displayed in the torque windows on the handle. The classic ‘click sound’ notifies the user when pre-set torque has been reached. Manufactured to BS EN 26789 : 1994 and Federal GGG-W-686 standards.
-
TRI-WING BIT SET (10-PCE)Read moreKennedy Screwdriver Bit Set: Tri-Wing – 10 Pieces
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.
Tri-Wing Bit Set
Tri-Wing: 0, 1, 2, 3, 4, 5, 6, 7 and 8. All 1/4â hex. x 25mm.
overall length, complete with quick release 1/4â hexagon bit adaptor.