Archives: Products
Showing 23393–23408 of 23773 results
-
TRIM PIN REMOVER 230mm O/AAdd to cartKennedy Trim Pin Remover
Designed for removing vehicle trim panels and upholstery. Also used for replacing door locks, window mechanisms and general bodywork repairs.
-
TRIMMING BLADES FOR CRAFT KNIFE (PKT-5)Read morePrecision Blades – General Cutting & Trimming
General Cutting & Trimming
-
TRIPLE HEAD SUCTION CUP 120mm (110KG)Add to cartKennedy Lever Operated Vacuums
For use in hand lift applications only. Multiple vacuums used on a single load can only improve handling. If using more than one vacuum tool the ratio of maximum lift capacity does not increase. To lift heavier weights a larger vacuum must be used. All are fitted with a rubber suction which will not damage contact surface during the lifting action. For use on glass, tiles, plastic or other smooth surfaced non-porous material and can also be used for pulling out dents. Hand lift only, must not be used in conjunction with mechanical lifting equipment.
-
TSEAL1 RETRACTABLE ENERGY ABSORBING LANYARD BLOCKRead moreLanyard Block
Retractable Energy Absorbing Lanyard Block
Retractable mini web block The unit connects directly onto a fall arrest harness. Locks on with decelerating brake action in the event of a fall and recoils the lanyard when slack is introduced to reduce trip hazards. Compact design, built in shock pack.
Working length: 2.5m.
Max fall arrest force: 6KN.
Size (L x W x D): 100 x 110 x 75mm.
Certified to: CE 0320, EN364, EN360. -
TSH1 REAR D 1 POINT HARNESSRead moreFront & Rear ‘D’ Harness
TuffSafe fall arrest harnesses are lightweight, durable and fully adjustable for easy fitting. Manufactured from 45mm water repellent polyester webbing with rip stitch fall indicators, they are ideal for all day comfort and dependability. All fittings are made from high tensile steel alloy. All TuffSafe harnesses are certified to: CE 0320, EN361, EN358, EN364.
Rear ‘D’ Harness
TSH1
One point attachment: One dorsal D-ring. Weight: 0.95kg.Front & Rear ‘D’ Harness
TSH2
Two point attachment: One dorsal D-ring. One chest mounted D-ring. Weight: 1.15kg.Front & Rear ‘D’ Harness
TSH3
Three point attachment: One Dorsal D-ring. Two side D-rings. Weight: 1.25kg.Front & Rear ‘D’ Harness
TSH4
Four point attachment: One dorsal D-ring. One chest mounted D-ring. Two side D-rings. Weight: 1.75kg. -
TSH2 FRONT & REAR 2 POINT HARNESSRead moreFront & Rear ‘D’ Harness
TuffSafe fall arrest harnesses are lightweight, durable and fully adjustable for easy fitting. Manufactured from 45mm water repellent polyester webbing with rip stitch fall indicators, they are ideal for all day comfort and dependability. All fittings are made from high tensile steel alloy. All TuffSafe harnesses are certified to: CE 0320, EN361, EN358, EN364.
Rear ‘D’ Harness
TSH1
One point attachment: One dorsal D-ring. Weight: 0.95kg.Front & Rear ‘D’ Harness
TSH2
Two point attachment: One dorsal D-ring. One chest mounted D-ring. Weight: 1.15kg.Front & Rear ‘D’ Harness
TSH3
Three point attachment: One Dorsal D-ring. Two side D-rings. Weight: 1.25kg.Front & Rear ‘D’ Harness
TSH4
Four point attachment: One dorsal D-ring. One chest mounted D-ring. Two side D-rings. Weight: 1.75kg. -
TSH3 REAR D HEARNESS C/WSIDE DEE/WPB/GEAR LOOPSRead moreFront & Rear ‘D’ Harness
TuffSafe fall arrest harnesses are lightweight, durable and fully adjustable for easy fitting. Manufactured from 45mm water repellent polyester webbing with rip stitch fall indicators, they are ideal for all day comfort and dependability. All fittings are made from high tensile steel alloy. All TuffSafe harnesses are certified to: CE 0320, EN361, EN358, EN364.
Rear ‘D’ Harness
TSH1
One point attachment: One dorsal D-ring. Weight: 0.95kg.Front & Rear ‘D’ Harness
TSH2
Two point attachment: One dorsal D-ring. One chest mounted D-ring. Weight: 1.15kg.Front & Rear ‘D’ Harness
TSH3
Three point attachment: One Dorsal D-ring. Two side D-rings. Weight: 1.25kg.Front & Rear ‘D’ Harness
TSH4
Four point attachment: One dorsal D-ring. One chest mounted D-ring. Two side D-rings. Weight: 1.75kg. -
TSH4 FRONT & REAR D HARNESS C/W SIDE DEE LOOPSRead moreFront & Rear ‘D’ Harness
TuffSafe fall arrest harnesses are lightweight, durable and fully adjustable for easy fitting. Manufactured from 45mm water repellent polyester webbing with rip stitch fall indicators, they are ideal for all day comfort and dependability. All fittings are made from high tensile steel alloy. All TuffSafe harnesses are certified to: CE 0320, EN361, EN358, EN364.
Rear ‘D’ Harness
TSH1
One point attachment: One dorsal D-ring. Weight: 0.95kg.Front & Rear ‘D’ Harness
TSH2
Two point attachment: One dorsal D-ring. One chest mounted D-ring. Weight: 1.15kg.Front & Rear ‘D’ Harness
TSH3
Three point attachment: One Dorsal D-ring. Two side D-rings. Weight: 1.25kg.Front & Rear ‘D’ Harness
TSH4
Four point attachment: One dorsal D-ring. One chest mounted D-ring. Two side D-rings. Weight: 1.75kg. -
TSPL PARKING LOOPSRead moreParking Loops
Prevents wear on harness straps. The clip fits onto the harnesses shoulder strap. Once fitted the karabiner is connected directly to the loop for safe stowage when not in use. This stops the lanyard from trailing on the floor and causing a trip hazard.
-
TSSA1 SHOCK ABSORBER WEB LANYARD 1.3M + KARABINERRead moreShock Absorbers
Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. Certified to: CE 0320, EN 364, EN 355. Max fall arrest force: 6KN.
TSSA1 & TSSA11
‘Soft Edge’ 32mm wide, cut resistant polyester webbing provides greater strength and resistance. Its water repellent coating can help prolong its life.TSSA9
Twin legs allow movement between anchorage points. The elasticated lanyard reduces the amount of hanging slack. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. The 35mm tubular webbing and tear webbing provides greater strength and resistance. -
TSSA11 SHOCK ABSORBER WEB LANYARD 1.3M + SCAFFOLD HOOKRead moreShock Absorbers
Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. Certified to: CE 0320, EN 364, EN 355. Max fall arrest force: 6KN.
TSSA1 & TSSA11
‘Soft Edge’ 32mm wide, cut resistant polyester webbing provides greater strength and resistance. Its water repellent coating can help prolong its life.TSSA9
Twin legs allow movement between anchorage points. The elasticated lanyard reduces the amount of hanging slack. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. The 35mm tubular webbing and tear webbing provides greater strength and resistance. -
TSSA9 SHOCK ABSORBER TWIN LEG 1.3M + SCAFFOLD HOOKRead moreShock Absorbers
Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. Certified to: CE 0320, EN 364, EN 355. Max fall arrest force: 6KN.
TSSA1 & TSSA11
‘Soft Edge’ 32mm wide, cut resistant polyester webbing provides greater strength and resistance. Its water repellent coating can help prolong its life.TSSA9
Twin legs allow movement between anchorage points. The elasticated lanyard reduces the amount of hanging slack. Lightweight, durable and fitted with a shock absorber pack and a 70mm delta link. The 35mm tubular webbing and tear webbing provides greater strength and resistance. -
TSTSS TRAUMA SUSPENSION STRAPSRead moreTrauma Suspension Straps
Trauma suspension straps allow the worker to stand up in their harness to ease the discomfort whilst suspended from a lanyard after a fall. Helps release the tension within the harness straps by relieving pressure on the groin, helps prevent loss of circulation to the legs and feet. Attaches to harness side leg straps.
-
TTO480 TOOL BOX WITH TOTE TRAY & ORGANISERRead moreKennedy Tool Box With Tote & Organiser
Made from impact resistant high-density plastic. Internal eight compartment tote tray with retractable carry handle and stacking 16-compartment organiser, moulded metric scale on the lid, lid locking clasps and sturdy plastic handle that also locks lid shut when lifting. With lock hasp and piano hinge.
-
TTT445 TOOL BOX WITH TOTE TRAYRead moreKennedy Tool Box With Tote & Organiser
Made from impact resistant high-density plastic. Internal eight compartment tote tray with retractable carry handle and stacking 16-compartment organiser, moulded metric scale on the lid, lid locking clasps and sturdy plastic handle that also locks lid shut when lifting. With lock hasp and piano hinge.
-
TTW650 TOOL BOX WITH TOTE TRAY & WHEELSRead moreKennedy Tool Box with Tote & Wheels
Recessed rigid handle for tilting box onto wheels for easy transportation. Large clasps to lock lid when in transit/ storage and padlock hole for security. Recessed carrying handle allows stacking. Five-compartment tote tray also features opaque lids on the two end compartments with moulded snap clasps to prevent accidental opening.
Weight: 3.30kg.