Archives: Products
Showing 23601–23616 of 23773 results
-
VINYL DISPOSABLE GLOVES BLUE – SMALL (BOX-100)Read moreVinyl Disposable Gloves
Sensitive, strong and comfortable. USDA accepted. For food, hospital, laboratory use and countless applications. Intermediate Design. For minimal risk only.
-
VINYL DISPOSABLE GLOVES BLUE – X/LARGE (BOX-100)Read moreVinyl Disposable Gloves
Sensitive, strong and comfortable. USDA accepted. For food, hospital, laboratory use and countless applications. Intermediate Design. For minimal risk only.
-
VINYL DISPOSABLE GLOVES CLEAR – LARGE (BOX-100)Read moreVinyl Disposable Gloves
Sensitive, strong and comfortable. USDA accepted. For food, hospital, laboratory use and countless applications. Intermediate Design. For minimal risk only.
-
VINYL DISPOSABLE GLOVES CLEAR – MEDIUM (BOX-100)Read moreVinyl Disposable Gloves
Sensitive, strong and comfortable. USDA accepted. For food, hospital, laboratory use and countless applications. Intermediate Design. For minimal risk only.
-
VINYL DISPOSABLE GLOVES CLEAR – X/LARGE (BOX-100)Read moreVinyl Disposable Gloves
Sensitive, strong and comfortable. USDA accepted. For food, hospital, laboratory use and countless applications. Intermediate Design. For minimal risk only.
-
VINYL IMPREGNATED GLOVESSIZE 10Read moreVinyl Impregnated Gloves
Abrasion, oil, grease and water resistant. Economical alternative to light-duty leather work gloves. Typical uses: metalworking.
Deters oil and grease and resists oil soak up where oil saturated gloves are a problem in many fabrication plants.
CAT I -
VIPER BLUE SPECS CLEAR LENS IMPACT/ANTI-SCRATCHRead moreKennedy Personal Protection Viper? Safety Spectacles
Kennedy Personal Protection safety eyewear provides protection to suit your specific requirement from traditional safety spectacles to the advanced flame resistant goggles, Kennedy Personal Protection has it all!
-
VISOR CARRIERRead moreHead Protection System: Safety Visor
Safety Visor
Clear, polycarbonate visor for use (only) with Tuffsafe Visor Carrier and Vented Safety Helmets. Optical class 1.
Conforms to: EN 166 (2001).
Size: 225mm.Ear defenders, visor carrier and visor supplied separately.
All items sold separately“Mix and Match” with accessories listed below or with any other PPE to create a tailored system for all applications
and trades.
All items are sold separately. -
VNMG 12T302-NF1 INSERT GRADE QX530Rp197.000Read moreIndexable Turning Inserts – VNMG
Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NFI. Application: Finish.
Chip Breaker: VF. Application: Finish.
Chip Breaker: NSS. Application: Light/Medium. -
VNMG 12T304-NF1 INSERT GRADE QX500Rp197.000Read moreIndexable Turning Inserts – VNMG
Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NFI. Application: Finish.
Chip Breaker: VF. Application: Finish.
Chip Breaker: NSS. Application: Light/Medium. -
VNMG 12T304-NF1 INSERT GRADE QX530Rp197.000Read moreIndexable Turning Inserts – VNMG
Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NFI. Application: Finish.
Chip Breaker: VF. Application: Finish.
Chip Breaker: NSS. Application: Light/Medium. -
VNMG 12T308-NF1 INSERT GRADE QX5030Read moreIndexable Turning Inserts – VNMG
Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NFI. Application: Finish.
Chip Breaker: VF. Application: Finish.
Chip Breaker: NSS. Application: Light/Medium. -
VNMG 160404-VF INSERT GRADE QX520Read moreIndexable Turning Inserts – VNMG
Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NFI. Application: Finish.
Chip Breaker: VF. Application: Finish.
Chip Breaker: NSS. Application: Light/Medium. -
VNR1FF NON-RETURN VALVE G1/8-G1/8 F-FRead moreKennedy Push-Fit Pneumatic Fittings – Non-Return Valve – Female to Female: Parallel
Non-Return Valve Female to Female – Parallel
Pressure range: +2 to +8bar.
Temperature range: -25 to +90°C. -
VNR3FF NON-RETURN VALVE G3/8-G3/8 F-FRead moreKennedy Push-Fit Pneumatic Fittings – Non-Return Valve – Female to Female: Parallel
Non-Return Valve Female to Female – Parallel
Pressure range: +2 to +8bar.
Temperature range: -25 to +90°C. -
VNR4FF NON-RETURN VALVE G1/2-G1/2 F-FRead moreKennedy Push-Fit Pneumatic Fittings – Non-Return Valve – Female to Female: Parallel
Non-Return Valve Female to Female – Parallel
Pressure range: +2 to +8bar.
Temperature range: -25 to +90°C.