Archives: Products

Showing 23745–23760 of 23773 results

WINDOW SCRAPER 170mm

Window Scraper

Snap resistant polypropylene handle. Supplied with hardened steel blade and removable plastic cover. Suitable for scraping paint off glass.

Read more
WINDSCREEN MOULDING RELEASE TOOL

Kennedy Windscreen Moulding Release Tool

Removes trim moulding around cemented windscreen and rear windows quickly and easily.

Read more
WINDSCREEN WIPER ARM REMOVAL TOOL

Kennedy Windscreen Wiper Arm Removal Tool

Windscreen wiper arm removal tool for removing stuck and stubborn taper fitting wiper arms.
Maximum opening: 27mm.
Collar size: 15mm.

Read more
WINTER JACKET NAVY 46/48″ XX/LARGE

Tuffsafe Trentino Winter Jacket

The Trentino jacket from Tuffsafe delivers style and performance without compromise, to keep you warm and dry while on site. The Trentino is the ideal winter work jacket it is waterproof, abrasion resistant and the zips have a waterproof seals to prevent ingress, in even the harshest of conditions.

Trentino features:
Two zipped front pockets and two zipped inside breast pockets.
Adjustable cuffs with hook-n-loop fastening.
Elasticated drawstring waist.
Foldaway drawstring hood concealed in the collar.
Lightweight 100% polyester Micro fleece mesh lining with micro-knit body panels. PU coated.
Durable Taslon outer fabric and Inner insulating fibre.
Zipped embroidery access to allow corporate identity to be added.

Sizes from small (38/40”) to XXL (46/48”).
Available in a choice colours Black or Navy Blue.

For the full range of Tuffsafe work wear and PPE equipment please refer to our catalogue or enter the search TFF-962.

Read more
WNMG 060404-NM4 INSERT GRADE QX520
Rp182.000

Indexable Turning Inserts – WNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX510 (ISO P01-P15 M10-M15 K01-K20) Coated. Used for finishing on Steels and Stainless Steels, suitable also for turning Cast Irons including Malleable irons at high speeds.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Medium.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
WNMG 060408-NSS INSERT GRADE QX8010
Rp182.000

Indexable Turning Inserts – WNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX510 (ISO P01-P15 M10-M15 K01-K20) Coated. Used for finishing on Steels and Stainless Steels, suitable also for turning Cast Irons including Malleable irons at high speeds.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Medium.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Add to cart
WNMG 080404-NM5 INSERT GRADE QX520

Indexable Turning Inserts – WNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX510 (ISO P01-P15 M10-M15 K01-K20) Coated. Used for finishing on Steels and Stainless Steels, suitable also for turning Cast Irons including Malleable irons at high speeds.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Medium.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
WNMG 080408-NM6 INSERT GRADE QX5030
Rp227.000

Indexable Turning Inserts – WNMG

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX510 (ISO P01-P15 M10-M15 K01-K20) Coated. Used for finishing on Steels and Stainless Steels, suitable also for turning Cast Irons including Malleable irons at high speeds.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Medium.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: NR8. Application: Rough.

Read more
WOOD SCRAPER SET (3-PCE)

Kennedy Cabinet Scraper Set

For fine surface finishing of intricate contour surfaces. Used to manually remove small amounts of material and excels in tricky grain areas where hand planes would cause tear out. They will stand up to any heavy-duty scraping task with minimum tear out. For best results, these scrapers should be burnished to a razor sharp edge.

Read more
WOODRUFF KEYS IMPERIAL KIT

Kennedy Fastener Assortments: Woodruff Keys

Woodruff Keys
Contents: 1/2 x 13/64 x 1/16, 1/2 x 13/64 x 3/32, 1/2 x 13/64 x 1/8, 5/8 x 1/4 x 3/32, 5/8 x 1/4 x 1/8, 5/8 x 1/4 x 5/32, 5/8 x 1/4 x 3/16, 3/4 x 5/16 x 1/8, 3/4 x 5/16 x 5/32, 3/4 x 5/16 x 3/16, 3/4 x 5/16 x 1/4, 7/8 x 3/8 x 5/32, 7/8 x 3/8 x 3/16, 7/8 x 3/8 x 7/32 and 7/8 x 3/8 x 1/4.

Read more
WORKSHOP AIR LINE GAUGE & PUSH-ON CONNECTOR

Heavy Duty Dial Type Tyre Inflator

This push on type tyre inflator is robust and has a dial type pressure gauge reading up to a maximum of 170psi. The pressure gauge is protected from accidental damage by a rubber shock guard.
Heavy duty corrosion-resistant body with steel operating lever, brass fittings and anti-shock rubber guard. 300psi rated fibre reinforced rubber hose.
Conforms to EC Directive 86/217/EEC.
Accuracy:
Reading scale: 2psi/10kPa (0.1bar).
Inflation range: 170psi/1200kPa (12bar).

Add to cart
WPS400 400W SUBMERSIBLE WATER PUMP 230V

Osaki Submersible Water Pump

WPS 400
Suitable for the effective drainage of cellars, cisterns and the general transfer of water. Can handle solids up to 5mm diameter. Easy to remove filters for cleaning and access to the impeller. Automatic float switch. Strong double insulated case. Multi-hose adaptor-accepts 25 or 32mm outlet hoses.
Motor: 400W (230V – 50Hz).
Max. flow rate: 7,500ltr/hr.
Max. delivery height/submersible depth: 5m.
Overload protection.

Read more
WRS500 WIRE ROPE LUBE SPRAY 500ml

SiteSafe WRS500 Wire Rope Lubricant Spray

The SiteSafe WRS500 wire rope spray lubricant has been formulated to lubricate and protect wire ropes from corrosion.

It has good penetrative qualities to lubricate deep into the core of ropes, displacing water and increasing the life of the rope. `Hi Tack` additives provide excellent adhesion to metal and reduced `fling off` during use.

Read more
XSB613K BELT SANDER KIT

Kobeâ¢ Mini Belt Sander Kit

MBS025-X
Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler.
Free speed: 18,000rpm.
Air inlet thread: 1/4â NPT.
Minimum air hose size (ID): 10mm (3/8â).
Air consumption: 4cfm* (113ltr/min).
Air pressure: 90psi/6.3bar.
Motor power: 0.6hp.
Noise Level: 84dBA
Sound Power; 92dBA
Vibration: 0.8m/s
Overall length: 390mm.

*Based on a 15 second cycle per minute average use.

Kit contents:
Contact arms: 6, 10, 13, 20mm with flat roller. 10mm with rounded roller.
Surface preparation file belts: 20mm: P80 grit (coarse), 13mm: P300 grit (fine)
Aluminium oxide file belts: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. 4mm hexagon key L-wrench.

Read more
Y ADAPTOR FOR CUP HOOK

Kennedy Screwdriver Bits: 1/4â Hexagon Drive Cup Hook Driver Bit

A hollowed out âY’ shaped driver bit designed for the driving in of cup hooks.
Overall length: 25mm.

All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Read more
YAMALOY METRIC B-TYPE THREADING KIT C/W TOOLHOLDER

Metric B-Type Toolholder & Threading Kit

QMA grade inserts (P20 – P40, K20 – K30).
Contents: 1x 16ER B 1.00 ISO insert, 1x 16ER B. 1.25 ISO insert, 1x 16ER B 1.50 ISO insert, 1x 16ER B 1.75 ISO insert, 1x 16ER B 2.00 ISO insert, 1x DER 2020 K16 toolholder, 1x T15 torx key. Supplied in plastic tube.

toolholder + 5 inserts

Read more