Archives: Products
Showing 385–400 of 23773 results
-
1.1/16″ A/F RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
1.1/16″ A/F SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
1.1/16″ A/F SOCKET 1/2″ SQUARE DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
1.1/16″ A/F SOCKET 3/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 3/4″ – AF
AF
A heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip essential for a quick tool change when hands are greasy. Manufactured from chrome vanadium and fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Registered Design No. 2053516UK. -
1.1/16″ HSS 1/2″ PARALLEL SHANK DRILLRead moreHSS Reduced Shank Drills (Blacksmiths)
1/2â parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2â. Point angle: 118°, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: 0.01/0.08. Manufactured to works standard.
-
1.1/16″ HSS T/S DRILLRp939.000Add to cartSherwood General Purpose HSS Taper Shank Drills, 3 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
1.1/16″ x 1.1/4″ A/F CH/VAN O/E SPANNERRead moreKennedy Industrial Open Ended Spanners – AF
AF
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
1.1/16″ x 1.1/4″ A/F CH/VAN RING SPANNERRead moreKennedy Double Ended Ring Spanners – AF
AF
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
1.1/2″ (38mm) REPLACEMENT BLADE FOR KEN5331600KRead moreDecorator’s Scrapers
For scraping paint and varnish off wood. High carbon steel double edged blade. Convex edges to reduce surface damage. Bi-material comfort grip. Supplied with a two or four edge blade.
The replacement blades are one piece – two or four edged and be changed by unscrewing from the handle and rotating to a new edge.
-
1.1/2″ A/F CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – AF
AF
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
1.1/2″ A/F OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
1.1/2″ A/F RING SLOGGINGWRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
1.1/2″ A/F SOCKET 1″ SQ DRRead moreKennedy Bi-Hexagon Standard Sockets, 1″
Bi-hexagon. (12 point). This range of 1â (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design gives a higher torque than normal sockets. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
1.1/2″ A/F SOCKET 3/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 3/4″ – AF
AF
A heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip essential for a quick tool change when hands are greasy. Manufactured from chrome vanadium and fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Registered Design No. 2053516UK. -
1.1/2″ BOSSING MALLETRead moreSheet Metal Working Tools
Bossing Mallets
Delivers the necessary blow to shape sheet metal and still made to the exacting standards. -
1.1/2″ CHISEL POINT HALF TANG PUTTY KNIFERead morePutty Knives
Half Tang
Available in traditional clipt pattern or chisel pattern.